Prepare to Configure

Available Languages

Download Options

  • PDF     (965.5 KB)
    View with Adobe Reader on a variety of devices
Updated:August 2, 2014

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Prerequisites and Restrictions

Prerequisites and Restrictions

The following are the prerequisites and restrictions for Configuring the Cisco Remote-PHY Solution.

Prerequisites for Configuring the Cisco Remote-PHY Solution

  • The Cisco CMTS must have at least one DOCSIS Timing, Communication, and Control (DTCC) card configured in the DOCSIS Timing Interface (DTI) mode for the Cisco uBR-MC3GX60V-RPHY line card to work with the CMC device.

Restrictions for Configuring the Cisco Remote-PHY Solution

  • Adding or removing the upstream or downstream channels in the channel group may trigger the Cisco CMC to reset.
  • The Cisco uBR-MC3GX60V-RPHY line card supports only static DEPI configuration.
  • The Cisco uBR-MC3GX60V-RPHY line card does not support Spectrum Management, Inter Line Card RF Spanning, and High Availability.

Notices

Copyright © 2014, Cisco Systems, Inc. All rights reserved.

Was this Document Helpful?

FeedbackFeedback

Contact Cisco