Table Of Contents
Regulatory Compliance and Safety Information for Cisco Smart+Connected Residential Solution Products
Statement 1071—Warning Definition
Statement 6000—EU Battery and WEEE Directives
Statement 331—Power Supply Installation Warning
Statement 341—Metal Contacts on the Battery
Statement 1001—Work During Lightning Activity
Statement 1004—Installation Instructions
Statement 1015—Battery Handling
Statement 1019—Main Disconnecting Device
Statement 1040—Product Disposal
Statement 1045—Short-Circuit Protection
Statement 1074—Comply with Local and National Electrical Codes
Japanese Electric Appliance and Radio Laws
Statement 371—Power Cable and AC Adapter
Cell Phone Interference Caution
Using External Devices With Your Cisco Smart+Connected Residential Products
Compliance and Safety Information
Manufacturer's FCC Declaration of Conformity Statement
International Guidelines for Exposure to Radio Waves
IEEE ANSI C95.1 1992 Guidelines for Exposure to Radio Waves
Canada Safety Code 6 Guidelines for Exposure to Radio Waves
Statement 2018—Class B Notice for FCC
Statement 2019—FCC Declaration of Conformity Information (for USA only)
Statement 2022—Class B Notice for Canada
Industry Canada Notice to Users
Statement 295—Class B Warning for Korea
Statement 157—VCCI Compliance for Class B Equipment
Australia / New Zealand Compliance
Obtaining Documentation and Submitting a Service Request
Regulatory Compliance and Safety Information for Cisco Smart+Connected Residential Solution Products
This document provides international agency compliance, safety, and statutory information for the following Cisco Smart+Connected Residential Solution products:
•Cisco Smart+Connected Controller 200
•Cisco Smart+Connected Controller 250
•Cisco Smart+Connected Controller 800
•Cisco Smart+Connected 7" In-wall Display
•Cisco Smart+Connected Portable Tablet and docking station
•Cisco Smart+Connected Video Door Station
•Cisco Smart+Connected I/O Extender
•Cisco Smart+Connected Universal Remote 150
•Cisco Smart+Connected Universal Remote 250
Contents
This document contains the following sections:
•Japanese Electric Appliance and Radio Laws
•Cell Phone Interference Caution
•Using External Devices With Your Cisco Smart+Connected Residential Products
•Compliance and Safety Information
•Obtaining Documentation and Submitting a Service Request
Conventions
This document uses the following conventions:
Note Means reader take note. Notes contain helpful suggestions or references to material not covered in the manual.
Caution Means reader be careful. In this situation, you might perform an action that could result in equipment damage or loss of data.
Warning Statements using this symbol are provided for additional information and to comply with regulatory and customer requirements.Healthcare Disclaimer
This equipment and peripherals are general communications products that are not intended for use as medical devices. In circumstances where this equipment may be integrated for use with medical devices, substantial additional validation testing may be required by the integrator in order to assure compatibility between the components of the medical device integration. From time to time, Cisco Systems may make updates to this equipment that may affect compatibility with such uses, as specific circumstances of integration may dictate. Cisco Systems does not represent, warrant, or otherwise guarantee compatibility of this equipment when the equipment is integrated for use with medical devices that are a product of a party other than Cisco Systems.
Translated Safety Warnings
This section repeats in multiple languages the basic warnings appropriate for Cisco Smart+Connected Residential products.
Statement 1071—Warning Definition
European Directives
This section contains conformity statements for European directives.
Statement 287—Declaration of Conformity to R&TTE Directive 1999/5/EC for the European Community, Switzerland, Norway, Iceland and Liechtenstein
English:
This equipment is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
[Bulgarian]:
[Czech]:
Dansk
[Danish]:Dette udstyr er i overensstemmelse med de væsentlige krav og andre relevante bestemmelser i Direktiv 1999/5/EF.
Deutsch
[German]:Dieses Gerät entspricht den grundlegenden Anforderungen und den weiteren entsprechenden Vorgaben der Richtlinie 1999/5/EU.
Eesti
[Estonian]:See seade vastab direktiivi 1999/5/EÜ olulistele nõuetele ja teistele asjakohastele sätetele.
Español
[Spanish]:Este equipo cumple con los requisitos esenciales asi como con otras disposiciones de la Directiva 1999/5/CE.
[Greek]:
Français
[French]:Cet appareil est conforme aux exigences essentielles et aux autres dispositions pertinentes de la Directive 1999/5/EC.
Íslenska
[Icelandic]:Þetta tæki er samkvæmt grunnkröfum og öðrum viðeigandi ákvæðum Tilskipunar 1999/5/EC.
Italiano
[Italian]:Questo apparato é conforme ai requisiti essenziali ed agli altri principi sanciti dalla Direttiva 1999/5/CE.
Latviski
[Latvian]:
[Lithuanian]:
Nederlands
[Dutch]:Dit apparaat voldoet aan de essentiele eisen en andere van toepassing zijnde bepalingen van de Richtlijn 1999/5/EC.
Malti
[Maltese]:
Magyar
[Hungarian]:
Norsk
[Norwegian]:Dette utstyret er i samsvar med de grunnleggende krav og andre relevante bestemmelser i EU-direktiv 1999/5/EF.
Polski
[Polish]:
Português
[Portuguese]:Este equipamento está em conformidade com os requisitos essenciais e outras provisões relevantes da Directiva 1999/5/EC.
[Romanian]:
Acest echipament este in conformitate cu cerintele esentiale si cu alte prevederi relevante ale Directivei 1999/5/EC.Slovensko
[Slovenian]:Ta naprava je skladna z bistvenimi zahtevami in ostalimi relevantnimi pogoji Direktive 1999/5/EC.
Slovensky
[Slovak]:Toto zariadenie je v zhode so základnými požiadavkami a inými príslušnými nariadeniami direktív: 1999/5/EC.
Suomi
[Finnish]:
Svenska
[Swedish]:
CE Marking
For Cisco Smart+Connected Residential products, the following CE mark is affixed to the equipment and packaging:
National Restrictions
In the majority of the EU and other European Countries, the 2.4- band has been made available for the use of wireless LANs. Table 1 provides an overview of the regulatory requirements in general applicable for the 2.4 band.
Note The regulatory limits for maximum output power are specified in eirp. The eirp level of a device can be calculated by adding the gain of the antenna used (specified in dBi) to the output power available at the connector (specified in dBm).
The requirements for any country may evolve. Cisco recommends that you check with the local authorities for the latest status of their national regulations for 2.4 wireless LANs.
Table 1 Overview of Regulatory Requirements for Wireless LANs
Frequency Band (MHz) Max Power Level (eirp) (mW) Indoor Only Indoor and Outdoor2400-2483.5
100
X
France
For 2.4 GHz, the output power is restricted to 10 mW EI P when the product is used outdoors in the band 2454 - 2483.5 MHz. There are no restrictions when used indoors or in other parts of the 2.4 GHz band. Check http://www.arcep.fr/ for more details.
Pour la bande 2.4 GHz, la puissance est limitée à 10 mW en p.i.r.e. pour les équipements utilisés en extérieur dans la bande http://www.comunicazioni.it/it/2454 - 2483.5 MHz. Il n'y a pas de restrictions pour des utilisations en intérieur ou dans d'autres parties de la bande 2.4 GHz. Consultez http://www.arcep.fr/ pour de plus amples détails.
Italy
This product meets the National Radio Interface and the requirements specified in the National Frequency Allocation Table for Italy. Unless this wireless LAN product is operating within the boundaries of the owner's property, its use requires a "general authorization." Please check http://www.comunicazioni.it/it/ for more details.
Questo prodotto è conforme alla specifiche di Interfaccia Radio Nazionali e rispetta il Piano Nazionale di ripartizione delle frequenze in Italia. Se non viene installato all 'interno del proprio fondo, l'utilizzo di prodotti Wireless LAN richiede una "Autorizzazione Generale". Consultare http://www.comunicazioni.it/it/ per maggiori dettagli.
Latvia
The outdoor usage of the 2.4 GHz band requires an authorization from the Electronic Communications Office. Please check http://www.esd.lv for more details.
2.4 GHz frekvencu joslas izmantošanai arpus telpam nepieciešama at auja no Elektronisko sakaru direkcijas. Vairak informacijas: http://www.esd.lv.
Note Although Norway, Iceland, Switzerland and Liechtenstein are not EU member states, the EU Directive 1999/5/EC has also been implemented in those countries.
Statement 6000—EU Battery and WEEE Directives
English:
[Bulgarian]:
[Czech]:
Dansk
[Danish]:
Deutsch
[German]:
Eesti
[Estonian]:
Español
[Spanish]:
[Greek]:
Français
[French]:
Gàidhlig
Gaelic:
Íslenska
IceLandic:
Italiano
[Italian]:
Latviski
[Latvian]:
[Lithuanian]:
Malti
Maltese:
Nederlands
[Dutch]:
Magyar
[Hungarian]:
Norsk
[Norwegian]:
Polski
[Polish]:
Português
[Portuguese]:
[Romanian]:
Slovensko
[Slovenian]:
Slovensky
[Slovak]:
Suomi
[Finnish]:
Svenska
[Swedish]:
Statement 6003—Taiwan Battery
Statement 6005—California Perchlorate Contamination Prevention Act (Title 22, California Code of Regulations, Chapter 33)
The battery inside this product might contain perchlorate, a known hazardous substance, so special handling and disposal of this product might be necessary. For more information about perchlorate and best management practices for perchlorate-containing substances, see http://www.dtsc.ca.gov/HazardousWaste/Perchlorate/index.cfm.
Statement 331—Power Supply Installation Warning
WarningThe power supply must be placed indoors. Statement 331
Waarschuwing
De stroomtoevoer moet binnen worden geplaatst.
Varoitus
Tehonlähde on sijoitettava sisätiloihin.
Attention
Le bloc d'alimentation électrique doit être placé à l'intérieur.
Warnung
Die Stromversorgungsquelle darf nicht im Freien aufgestellt werden.
Avvertenza
L'alimentatore deve essere posto in un luogo interno.
Advarsel
Strømkilden skal være plassert innendørs.
Aviso
A fonte de alimentação deve ser instalada no interior.
¡Advertencia!
El suministro de energía debe estar ubicado en un lugar cubierto y no al aire libre.
Varning!
Strömkällan måste vara placerad inomhus.
Statement 341—Metal Contacts on the Battery
WarningDo not touch or bridge the metal contacts on the battery. Unintentional discharge of the batteries can cause serious burns. Statement 341
Waarschuwing
Raak de metalen contacten op de batterij niet aan en verbind ze niet met elkaar. Het onopzettelijk ontladen van de batterijen kan ernstige brandwonden veroorzaken.
Varoitus
Älä koske akun metallisiin kosketuspintoihin tai oikosulje niitä. Akkujen purkaminen vahingossa voi aiheuttaa vakavia palovammoja.
Attention
Ne pas toucher ou ponter les contacts métalliques de la pile. Une décharge non intentionnelle des piles peut entraîner des brûlures sévères.
Warnung
Berühren oder verbinden Sie die Metallkontakte der Batterie nicht. Eine unbeabsichtigte Entladung kann zu ernsthaften Verbrennungen führen.
Avvertenza
Non toccare o cortocircuitare i contatti metallici sulla batteria. La scarica accidentale delle batterie può provocare serie bruciature.
Advarsel
Metallkontaktene på batteriet må ikke røres eller sammenkobles. Utilsiktet utlading av batteriene kan føre til alvorlige brannskader.
Aviso
Não toque nem estabeleça ligação entre os contactos metálicos da bateria. A descarga acidental das baterias pode causar queimaduras graves.
¡Advertencia!
No tocar los contactos de metal de la batería, ni hacer puente con ellos. La descarga accidental de las baterías puede provocar quemaduras graves.
Varning!
Vidrör inte och förbikoppla inte batteriets metallkontakter. Oavsiktlig urladdning av batterierna kan orsaka allvarliga brännskador.
Statement 1001—Work During Lightning Activity
WarningDo not work on the system or connect or disconnect cables during periods of lightning activity.
Waarschuwing
Tijdens onweer dat gepaard gaat met bliksem, dient u niet aan het systeem te werken of kabels aan te sluiten of te ontkoppelen.
Varoitus
Älä työskentele järjestelmän parissa äläkä yhdistä tai irrota kaapeleita ukkosilmalla.
Attention
Ne pas travailler sur le système ni brancher ou débrancher les câbles pendant un orage.
Warnung
Arbeiten Sie nicht am System und schließen Sie keine Kabel an bzw. trennen Sie keine ab, wenn es gewittert.
Avvertenza
Non lavorare sul sistema o collegare oppure scollegare i cavi durante un temporale con fulmini.
Advarsel
Utfør aldri arbeid på systemet, eller koble kabler til eller fra systemet når det tordner eller lyner.
Aviso
Não trabalhe no sistema ou ligue e desligue cabos durante períodos de mau tempo (trovoada).
¡Advertencia!
No operar el sistema ni conectar o desconectar cables durante el transcurso de descargas eléctricas en la atmósfera.
Varning!
Vid åska skall du aldrig utföra arbete på systemet eller ansluta eller koppla loss kablar.
Statement 1004—Installation Instructions
WarningRead the installation instructions before connecting the system to the power source. Statement 1004
Waarschuwing
Raadpleeg de installatie-instructies voordat u het systeem op de voedingsbron aansluit.
Varoitus
Lue asennusohjeet ennen järjestelmän yhdistämistä virtalähteeseen.
Attention
Avant de brancher le système sur la source d'alimentation, consulter les directives d'installation.
Warnung
Vor dem Anschließen des Systems an die Stromquelle die Installationsanweisungen lesen.
Avvertenza
Consultare le istruzioni di installazione prima di collegare il sistema all'alimentatore.
Advarsel
Les installasjonsinstruksjonene før systemet kobles til strømkilden.
Aviso
Leia as instruções de instalação antes de ligar o sistema à fonte de energia.
¡Advertencia!
Lea las instrucciones de instalación antes de conectar el sistema a la red de alimentación.
Varning!
Läs installationsanvisningarna innan du kopplar systemet till strömförsörjningsenheten.
Statement 1015—Battery Handling
WarningThere is the danger of explosion if the battery is replaced incorrectly. Replace the battery only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer's instructions. Statement 1015
Waarschuwing
Er is ontploffingsgevaar als de batterij verkeerd vervangen wordt. Vervang de batterij slechts met hetzelfde of een equivalent type dat door de fabrikant aanbevolen is. Gebruikte batterijen dienen overeenkomstig fabrieksvoorschriften weggeworpen te worden.
Varoitus
Räjähdyksen vaara, jos akku on vaihdettu väärään akkuun. Käytä vaihtamiseen ainoastaan saman- tai vastaavantyyppistä akkua, joka on valmistajan suosittelema. Hävitä käytetyt akut valmistajan ohjeiden mukaan.
Attention
Danger d'explosion si la pile n'est pas remplacée correctement. Ne la remplacer que par une pile de type semblable ou équivalent, recommandée par le fabricant. Jeter les piles usagées conformément aux instructions du fabricant.
Warnung
Bei Einsetzen einer falschen Batterie besteht Explosionsgefahr. Ersetzen Sie die Batterie nur durch den gleichen oder vom Hersteller empfohlenen Batterietyp. Entsorgen Sie die benutzten Batterien nach den Anweisungen des Herstellers.
Avvertenza
Pericolo di esplosione se la batteria non è installata correttamente. Sostituire solo con una di tipo uguale o equivalente, consigliata dal produttore. Eliminare le batterie usate secondo le istruzioni del produttore.
Advarsel
Det kan være fare for eksplosjon hvis batteriet skiftes på feil måte. Skift kun med samme eller tilsvarende type som er anbefalt av produsenten. Kasser brukte batterier i henhold til produsentens instruksjoner.
Aviso
Existe perigo de explosão se a bateria for substituída incorrectamente. Substitua a bateria por uma bateria igual ou de um tipo equivalente recomendado pelo fabricante. Destrua as baterias usadas conforme as instruções do fabricante.
¡Advertencia!
Existe peligro de explosión si la batería se reemplaza de manera incorrecta. Reemplazar la batería exclusivamente con el mismo tipo o el equivalente recomendado por el fabricante. Desechar las baterías gastadas según las instrucciones del fabricante.
Varning!
Explosionsfara vid felaktigt batteribyte. Ersätt endast batteriet med samma batterityp som rekommenderas av tillverkaren eller motsvarande. Följ tillverkarens anvisningar vid kassering av använda batterier.
Advarsel
Der er risiko for eksplosion, hvis batteriet ikke udskiftes korrekt. Batteriet må kun udskiftes med samme eller med en tilsvarende type, som anbefales af producenten. Bortskaf brugte batterier i overensstemmelse med producentens instruktioner.
Existe risco de explosão se a bateria for substituída incorretamente. Substitua a bateria somente com o mesmo tipo ou um tipo equivalente recomendado pelo fabricante. Descarte as baterias usadas de acordo com as instruções do fabricante.
Statement 1019—Main Disconnecting Device
WarningThe plug-socket combination must be accessible at all times, because it serves as the main disconnecting device. Statement 1019
Waarschuwing
De combinatie van de stekker en het elektrisch contactpunt moet te allen tijde toegankelijk zijn omdat deze het hoofdmechanisme vormt voor verbreking van de aansluiting.
Varoitus
Pistoke/liitinkohta toimii pääkatkaisumekanismina. Pääsy siihen on pidettävä aina esteettömänä.
Attention
La combinaison de prise de courant doit être accessible à tout moment parce qu'elle fait office de système principal de déconnexion.
Warnung
Der Netzkabelanschluß am Gerät muß jederzeit zugänglich sein, weil er als primäre Ausschaltvorrichtung dient.
Avvertenza
Il gruppo spina-presa deve essere sempre accessibile, poiché viene utilizzato come dispositivo di scollegamento principale.
Advarsel
Kombinasjonen støpsel/uttak må alltid være tilgjengelig ettersom den fungerer som hovedfrakoplingsenhet.
Aviso
A combinação ficha-tomada deverá ser sempre acessível, porque funciona como interruptor principal.
¡Advertencia!
El conjunto de clavija y toma ha de encontrarse siempre accesible ya que hace las veces de dispositivo de desconexión principal.
Varning!
Man måste alltid kunna komma åt stickproppen i uttaget, eftersom denna koppling utgör den huvudsakliga frånkopplingsanordningen.
Statement 1040—Product Disposal
WarningUltimate disposal of this product should be handled according to all national laws and regulations. Statement 1040
Waarschuwing
Het uiteindelijke wegruimen van dit product dient te geschieden in overeenstemming met alle nationale wetten en reglementen.
Varoitus
Tämä tuote on hävitettävä kansallisten lakien ja määräysten mukaisesti.
Attention
La mise au rebut ou le recyclage de ce produit sont généralement soumis à des lois et/ou directives de respect de l'environnement. Renseignez-vous auprès de l'organisme compétent.
Warnung
Die Entsorgung dieses Produkts sollte gemäß allen Bestimmungen und Gesetzen des Landes erfolgen.
Avvertenza
Lo smaltimento di questo prodotto deve essere eseguito secondo le leggi e regolazioni locali.
Advarsel
Endelig kassering av dette produktet skal være i henhold til alle relevante nasjonale lover og bestemmelser.
Aviso
Deitar fora este produto em conformidade com todas as leis e regulamentos nacionais.
¡Advertencia!
Al deshacerse por completo de este producto debe seguir todas las leyes y reglamentos nacionales.
Varning!
Vid deponering hanteras produkten enligt gällande lagar och bestämmelser.
Aviso
O descarte definitivo deste produto deve estar de acordo com todas as leis e regulamentações nacionais.
Advarsel
Endelig bortskaffelse af dette produkt skal ske i henhold til gældende love og regler.
Statement 1045—Short-Circuit Protection
WarningThis product requires short-circuit (overcurrent) protection, to be provided as part of the building installation. Install only in accordance with national and local wiring regulations. Statement 1045
Waarschuwing
Voor dit product moet kortsluitbeveiliging (overstroombeveiliging) deel uitmaken van de installatie in het gebouw. De installatie moet voldoen aan de nationale en lokale bedradingvoorschriften.
Varoitus
Tämä tuote vaatii suojauksen oikosulkuja (ylivirtaa) vastaan osana asennusta rakennukseen. Asenna ainoastaan kansallisten ja paikallisten johdotussäännösten mukaisesti.
Attention
La protection de ce produit contre les courts-circuits (surtensions) doit être assurée par la configuration électrique du bâtiment. Vérifiez que l'installation a lieu uniquement en conformité avec les normes de câblage en vigueur au niveau national et local.
Warnung
Für dieses Produkt ist eine Kurzschlußsicherung (Überstromsicherung) erforderlich, die als Teil der Gebäudeinstallation zur Verfügung gestellt wird. Die Installation sollte nur in Übereinstimmung mit den nationalen und regionalen Vorschriften zur Verkabelung erfolgen.
Avvertenza
Questo prodotto richiede una protezione contro i cortocircuiti, da fornirsi come parte integrante delle dotazioni presenti nell'edificio. Effettuare l'installazione rispettando le Norme CEI pertinenti.
Advarsel
Dette produktet krever beskyttelse mot kortslutninger (overspenninger) som en del av installasjonen. Bare installer utstyret i henhold til nasjonale og lokale krav til ledningsnett.
Aviso
Este produto requer proteção contra curto-circuitos (sobreintensidade de corrente), que deve estar instalada nos edifícios. Instale apenas de acordo com as normas de instalação elétrica nacionais e locais.
Advertencia
Este producto necesita estar conectado a la protección frente a cortacircuitos (sobretensiones) que exista en el edificio. Instálelo únicamente en conformidad con las regulaciones sobre cableado, tanto locales como nacionales, a las que se tenga que atener.
Varning!
Denna produkt kräver att kortslutningsskydd (överström) tillhandahålles som en del av byggnadsinstallationen. Installera bara i enlighet med nationella och lokala kabeldragningsbestämmelser.
Aviso
Este produto requer uma proteção contra curto-circuito (sobrecorrente) que deve fazer parte da instalação do edifício. Faça a instalação somente de acordo com as regulamentações de cabeamento nacionais e locais.
Advarsel
Dette produkt kræver beskyttelse mod kortslutning (overstrøm). Dette skal være en del elinstallationen i bygningen. Installation skal ske i overensstemmelse med nationale og lokale ledningsregler.
Statement 1074—Comply with Local and National Electrical Codes
WarningInstallation of the equipment must comply with local and national electrical codes. Statement 1074
Waarschuwing
Bij installatie van de apparatuur moet worden voldaan aan de lokale en nationale elektriciteitsvoorschriften.
Varoitus
Laitteisto tulee asentaa paikallisten ja kansallisten sähkömääräysten mukaisesti.
Attention
L'équipement doit être installé conformément aux normes électriques nationales et locales.
Warnung
Die Installation der Geräte muss den Sicherheitsstandards entsprechen.
Avvertenza
L'installazione dell'impianto deve essere conforme ai codici elettrici locali e nazionali.
Advarsel
Installasjon av utstyret må samsvare med lokale og nasjonale elektrisitetsforskrifter.
Aviso
A instalação do equipamento tem de estar em conformidade com os códigos eléctricos locais e nacionais.
¡Advertencia!
La instalación del equipo debe cumplir con las normativas de electricidad locales y nacionales.
Varning!
Installation av utrustningen måste ske i enlighet med gällande elinstallationsföreskrifter.
Caution Only use the Cisco specified power supply. Refer to the installation manual provided with this product.
Caution Inline power circuits provide current through the communication cable. Use the Cisco provided cable or a minimum 24AWG communication cable.
Japanese Electric Appliance and Radio Laws
Statement 371—Power Cable and AC Adapter
Cell Phone Interference Caution
Caution Using a cell, mobile, or GSM phone, or two-way radio in close proximity to Cisco Smart+Connected Residential products might cause interference. For more information, refer to the manufacturer's documentation of the interfering device.
Using External Devices With Your Cisco Smart+Connected Residential Products
The following information applies when you use external devices with Cisco Smart+Connected Residential products:
Cisco recommends the use of good quality external devices (speakers, microphones, and headsets) that are shielded (screened) against unwanted radio frequency (RF) and audio frequency (AF) signals.
Depending on the quality of these devices and their proximity to other devices such as mobile phones or two-way radios, some audio noise may still occur. In these cases, Cisco recommends that you take one or more of the following actions:
•Move the external device away from the source of the RF or AF signals.
•Route the external device cables away from the source of the RF or AF signals.
•Use shielded (screened) cables for the external device, or use cables with a better shield (screen) and connector.
•Shorten the length of the external device cable.
•Apply ferrites or other such devices on the cables for the external device.
Cisco cannot guarantee the performance of the system because Cisco has no control over the quality of external devices, cables, and connectors. The system will perform adequately when suitable devices are attached using good quality cables and connectors.
Caution Caution: In European Union countries, use only external speakers, microphones, cables, and headsets that are fully compliant with the EMC Directives 2006/95/EC and 2004/108/EC.
Battery Safety Notices
These battery safety notices apply to the batteries that are approved by the Cisco Smart+Connected Residential Solution manufacturers.
Caution This symbol means reader be careful. In this situation, you might do something that could result in equipment damage. Refer to the product documentation for instructions.
Caution The battery pack is intended for use only with this device.
Caution Do not disassemble, crush, puncture, or incinerate the battery pack.
Caution To avoid risk of fire, burns, or damage to your battery pack, do not allow a metal object to touch the battery contacts.
Caution Handle a damaged or leaking battery with extreme care. If you come in contact with the electrolyte, wash the exposed area with soap and water. If the electrolyte has come in contact the eye, flush the eye with water for 15 minutes and seek medical attention.
Caution Do not charge the battery pack if the ambient temperature exceeds 104 degrees Fahrenheit (40 degrees Celsius).
Caution Do not expose the battery pack to high storage temperatures (above 140 degrees Fahrenheit, 60 degrees Celsius).
Caution When discarding a battery pack, contact your local waste disposal provider regarding local restrictions on the disposal or recycling of batteries.
Caution To obtain a replacement battery, contact your local dealer. Use only the Cisco specified battery and verify that it has the correct Cisco part number.
Caution Use only the Cisco power supply that is compatible with your phone. To order your power supply, contact your local dealer and refer to the list of Cisco part numbers.
Safety Guidelines
The following are safety guidelines for using the Cisco Smart+Connected Residential products in specific environments:
•Do not use this product as the primary communications tool in healthcare environments, as it may use an unregulated frequency band that is susceptible to interference from other devices or equipment.
•The use of wireless devices in hospitals is restricted to the limits set forth by each hospital.
•The use of wireless devices in hazardous locations is limited to the constraints posed by the safety directors of such environments.
•The use of wireless devices on airplanes is governed by the Federal Aviation Administration (FAA).
Compliance and Safety Information
Regulatory Compliance
The compliance label can be found under the battery in the battery compartment. The Cisco Smart+Connected Residential product batteries will be separated from the tablet in production packaging so that the product label is easily visible to the user.
For specifics about which standards have been applied, refer to the Declaration of Conformity:
Specification DescriptionRegulatory Compliance
Products with CE marking indicate compliance with the 2006/95/EC and 2004/108/EC directives, which include the safety and EMC standards listed.
Manufacturer's FCC Declaration of Conformity Statement
Product: Cisco Smart+Connected Controller 200
Model: SCH-CONTROL-200
FCC Certification Number: R33C4HC2001
ICID: 7848A-C4HC200B
Manufacturer:
CONTROL4 CORPORATION
11734 S. ELECTION ROAD SUITE 200
SALT LAKE CITY
UT 84020 USA
and
Product: Cisco Smart+Connected Controller 250
Model: SCH-CONTROL-250
FCC Certification Number: R33C4HC250
ICID: 7848A-C4HC250
Manufacturer:
CONTROL4 CORPORATION
11734 S. ELECTION ROAD SUITE 200
SALT LAKE CITY
UT 84020 USA
and
Product: Cisco Smart+Connected Controller 800
Model: SCH-CONTROL-800
FCC Certification Number: R33C4HC800
ICID: 7848A-C4HC800
Manufacturer:
CONTROL4 CORPORATION
11734 S. ELECTION ROAD SUITE 200
SALT LAKE CITY
UT 84020 USA
and
Product: Cisco Smart+Connected 7" In-wall Display
Model: SCH-7IN-TS (-W and -B)
FCC Certification Number: R33C4TW7C0
ICID: 7848A-C4TW7C0
Manufacturer:
CONTROL4 CORPORATION
11734 S. ELECTION ROAD SUITE 200
SALT LAKE CITY
UT 84020 USA
and
Product: Cisco Smart+Connected Portable Tablet and docking station
Model: SCH-TABLET
FCC Certification Number: R33C4TSMC7
ICID: 7874A-C4TSMC7
Manufacturer:
CONTROL4 CORPORATION
11734 S. ELECTION ROAD SUITE 200
SALT LAKE CITY
UT 84020 USA
and
Product: Cisco External Video Door Station
Model: SCH-VDS-E)
FCC Certification Number: R33C4DSC
ICID: 7848A-C4DSC
Manufacturer:
CONTROL4 CORPORATION
11734 S. ELECTION ROAD SUITE 200
SALT LAKE CITY
UT 84020 USA
and
Product: Cisco Internal Video Door Station
Model: SCH-VDS-I
FCC Certification Number: R33C4DSCINT
ICID: 7848A-C4DSCINT
Manufacturer:
CONTROL4 CORPORATION
11734 S. ELECTION ROAD SUITE 200
SALT LAKE CITY
UT 84020 USA
and
Product: Cisco Smart+Connected Universal Remote 150
Model: SCH-REMOTE-150
FCC Certification Number: R33C4SR150Z
ICID: 7874A-C4SR150B
Manufacturer:
CONTROL4 CORPORATION
11734 S. ELECTION ROAD SUITE 200
SALT LAKE CITY
UT 84020 USA
and
Product: Cisco Smart+Connected Universal Remote 250
Model: SCH-REMOTE-250
FCC Certification Number: R33C4SR250Z
ICID: 7874A-C4SR250Z
Manufacturer:
CONTROL4 CORPORATION
11734 S. ELECTION ROAD SUITE 200
SALT LAKE CITY
UT 84020 USA
SAR Statements
This product's SAR value meets applicable national SAR limits of < 2.0W/kg or < 1.6W/kg. The specific values can be found in the product Reference Guides.
International Guidelines for Exposure to Radio Waves
THIS DEVICE MEETS INTERNATIONAL GUIDELINES FOR EXPOSURE TO RADIO WAVES.
Your mobile device is a radio transmitter and receiver. It is designed not to exceed the limits for exposure to radio waves (radio frequency electromagnetic fields) recommended by international guidelines. The guidelines were developed by an independent scientific organization (ICNIRP) and include a substantial safety margin designed to assure the safety of all persons, regardless of age and health.
The radio wave exposure guidelines use a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit for mobile devices is 2.0 W/kg.
Tests for SAR are conducted using standard operating positions with the device transmitting at its highest certified power level in all tested frequency bands. The highest SAR values under the ICNIRP guidelines for this device model are:
Maximum SAR for Cisco Controller 200 model SCH-CONTROL-200 (FCC ID: R33C4HC2001 and ICID: 7848A-C4HC200B) and conditions under which it was recordedBody SAR
2.4 GHz @ 10 g
Wi-Fi: 0.464 W/kg
Maximum SAR for Cisco Controller 250 model SCH-CONTROL-250 (FCC ID: R33C4HC250 and ICID: 7848A-C4HC250) and conditions under which it was recordedBody SAR
2.4 GHz @ 10 g
Wi-Fi: 0.464 W/kg
Maximum SAR for Cisco Controller 800 model SCH-CONTROL-800 (FCC ID: R33C4HC800 and ICID: 7848A-C4HC800) and conditions under which it was recordedBody SAR
2.4 GHz @ 10 g
Wi-Fi: 0.464 W/kg
Maximum SAR for Cisco In-wall Display model SCH-7IN-TS (FCC ID: R33C4TW7C0 and ICID: 7848A-C4TW7C0) and conditions under which it was recordedBody SAR
2.4 GHz @ 10 g
Wi-Fi: 0.464 W/kg
Maximum SAR for Cisco Portable Tablet model SCH-TABLET (FCC ID: R33C4TSMC7 and ICID: 7874A-C4TSMC7) and conditions under which it was recordedBody SAR
2.4 GHz @ 10 g
Wi-Fi: 0.464 W/kg
Maximum SAR for Cisco External Video Door Station model SCH-VDS-E (FCC ID: R33C4DSC and ICID: 7848A-C4DSC) and conditions under which it was recordedBody SAR
2.4 GHz @ 10 g
Wi-Fi: 0.464 W/kg
Maximum SAR for Cisco Internal Video Door Station model SCH-VDS-I (FCC ID: R33C4DSCINT and ICID: 7848A-C4DSCINT) and conditions under which it was recordedBody SAR
2.4 GHz @ 10 g
Wi-Fi: 0.464 W/kg
Maximum SAR for Cisco Universal Remote 150 model SCH-REMOTE-150 (FCC ID: R33C4SR150Z and ICID: 7874A-C4SR150B) and conditions under which it was recordedBody SAR
2.4 GHz @ 10 g
Wi-Fi: 0.464 W/kg
Maximum SAR for Cisco Universal Remote 250 model SCH-REMOTE-250 (FCC ID: R33C4SR250Z and ICID: 7874A-C4SR250Z) and conditions under which it was recordedBody SAR
2.4 GHz @ 10 g
Wi-Fi: 0.464 W/kg
During use, the actual SAR value for this device may be well below the value stated above. The operating power of your mobile device is automatically decreased by the base-station, thereby conserving battery life and minimizing interference with adjacent network cells, if full power is not needed for the call. The amount of power reduction (if any) is dependent on a number of factors such as how close you are to a base-station. In general, the lower the power output by the device, the lower its SAR value.
The World Health Organization has stated that present scientific information does not indicate the need for any special precautions for the use of mobile devices. They recommend that if you are interested in further reducing your exposure then you can easily do so by limiting your usage or simply using a hands-free kit to keep the device away from the head and body.
IEEE ANSI C95.1 1992 Guidelines for Exposure to Radio Waves
THIS DEVICE MEETS IEEE ANSI C95.1 1992 GUIDELINES FOR EXPOSURE TO RADIO WAVES.
Your mobile device is a radio transmitter and receiver. It is designed not to exceed the limits for exposure to radio waves (radio frequency electromagnetic fields) recommended by international guidelines. The guidelines were developed by the IEEE ANSI C 95.1 and include a substantial safety margin designed to assure the safety of all persons, regardless of age and health.
The radio wave exposure guidelines use a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit for mobile devices is 1.6W/kg.
Tests for SAR are conducted using standard operating positions with the device transmitting at its highest certified power level in all tested frequency bands. The highest SAR values under the FCC guidelines for this device model are:
Maximum SAR for Cisco Controller 200 model SCH-CONTROL-200 (FCC ID: R33C4HC2001 and ICID: 7848A-C4HC200B) and conditions under which it was recordedBody SAR
2.4 GHz @ 10 g
Wi-Fi: 0.464 W/kg
Maximum SAR for Cisco Controller 250 model SCH-CONTROL-250 (FCC ID: XXXXXXXXXXX) and conditions under which it was recordedBody SAR
2.4 GHz @ 10 g
Wi-Fi: 0.464 W/kg
Maximum SAR for Cisco Controller 800 model SCH-CONTROL-800 (FCC ID: R33C4HC800 and ICID: 7848A-C4HC800) and conditions under which it was recordedBody SAR
2.4 GHz @ 10 g
Wi-Fi: 0.464 W/kg
Maximum SAR for Cisco In-wall Display model SCH-7IN-TS (FCC ID: R33C4TW7C0 and ICID: 7848A-C4TW7C0) and conditions under which it was recordedBody SAR
2.4 GHz @ 10 g
Wi-Fi: 0.464 W/kg
Maximum SAR for Cisco Portable Tablet model SCH-TABLET (FCC ID: R33C4TSMC7 and ICID: 7874A-C4TSMC7) and conditions under which it was recordedBody SAR
2.4 GHz @ 10 g
Wi-Fi: 0.464 W/kg
Maximum SAR for Cisco External Video Door Station model SCH-VDS-E (FCC ID: R33C4DSC and ICID: 7848A-C4DSC) and conditions under which it was recordedBody SAR
2.4 GHz @ 10 g
Wi-Fi: 0.464 W/kg
Maximum SAR for Cisco Internal Video Door Station model SCH-VDS-I (FCC ID: R33C4DSCINT and ICID: 7848A-C4DSCINT) and conditions under which it was recordedBody SAR
2.4 GHz @ 10 g
Wi-Fi: 0.464 W/kg
Maximum SAR for Cisco Universal Remote 150 model SCH-REMOTE-150 (FCC ID: R33C4SR150Z and ICID: 7874A-C4SR150B) and conditions under which it was recordedBody SAR
2.4 GHz @ 10 g
Wi-Fi: 0.464 W/kg
Maximum SAR for Cisco Universal Remote 250 model SCH-REMOTE-250 (FCC ID: R33C4SR250Z and ICID: 7874A-C4SR250Z) and conditions under which it was recordedBody SAR
2.4 GHz @ 10 g
Wi-Fi: 0.464 W/kg
During use, the actual SAR value for this device may be well below the value stated above. The operating power of your mobile device is automatically decreased by the base-station, thereby conserving battery life and minimizing interference with adjacent network cells, if full power is not needed for the call. The amount of power reduction (if any) is dependent on a number of factors such as how close you are to a base-station. In general, the lower the power output by the device, the lower its SAR value.
The World Health Organization has stated that present scientific information does not indicate the need for any special precautions for the use of mobile devices. They recommend that if you are interested in further reducing your exposure then you can easily do so by limiting your usage or simply using a hands-free kit to keep the device away from the head and body.
Canada Safety Code 6 Guidelines for Exposure to Radio Waves
English
THIS DEVICE MEETS HEALTH CANADA SAFETY CODE 6 GUIDELINES FOR EXPOSURE TO RADIO WAVES.
Your mobile device is a radio transmitter and receiver. It is designed not to exceed the limits for exposure to radio waves (radio frequency electromagnetic fields) recommended by international guidelines. The guidelines were developed by Health Canada and include a substantial safety margin designed to assure the safety of all persons, regardless of age and health.
The radio wave exposure guidelines use a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit for mobile devices is 1.6W/kg.
Tests for SAR are conducted using standard operating positions with the device transmitting at its highest certified power level in all tested frequency bands. The highest SAR values under the Health Canada guidelines for this device model are:
Maximum SAR for Cisco Controller 200 model SCH-CONTROL-200 (FCC ID: R33C4HC2001 and ICID: 7848A-C4HC200B) and conditions under which it was recordedBody SAR
2.4 GHz @ 10 g
Wi-Fi: 0.464 W/kg
Maximum SAR for Cisco Controller 250 model SCH-CONTROL-250 (FCC ID: XXXXXXXXXXX) and conditions under which it was recordedBody SAR
2.4 GHz @ 10 g
Wi-Fi: 0.464 W/kg
Maximum SAR for Cisco Controller 800 model SCH-CONTROL-800 (FCC ID: R33C4HC800 and ICID: 7848A-C4HC800) and conditions under which it was recordedBody SAR
2.4 GHz @ 10 g
Wi-Fi: 0.464 W/kg
Maximum SAR for Cisco In-wall Display model SCH-7IN-TS (FCC ID: R33C4TW7C0 and ICID: 7848A-C4TW7C0) and conditions under which it was recordedBody SAR
2.4 GHz @ 10 g
Wi-Fi: 0.464 W/kg
Maximum SAR for Cisco Portable Tablet model SCH-TABLET (FCC ID: R33C4TSMC7 and ICID: 7874A-C4TSMC7) and conditions under which it was recordedBody SAR
2.4 GHz @ 10 g
Wi-Fi: 0.464 W/kg
Maximum SAR for Cisco External Video Door Station model SCH-VDS-E (FCC ID: R33C4DSC and ICID: 7848A-C4DSC) and conditions under which it was recordedBody SAR
2.4 GHz @ 10 g
Wi-Fi: 0.464 W/kg
Maximum SAR for Cisco Internal Video Door Station model SCH-VDS-I (FCC ID: R33C4DSCINT and ICID: 7848A-C4DSCINT) and conditions under which it was recordedBody SAR
2.4 GHz @ 10 g
Wi-Fi: 0.464 W/kg
Maximum SAR for Cisco Universal Remote 150 model SCH-REMOTE-150 (FCC ID: R33C4SR150Z and ICID: 7874A-C4SR150B) and conditions under which it was recordedBody SAR
2.4 GHz @ 10 g
Wi-Fi: 0.464 W/kg
Maximum SAR for Cisco Universal Remote 250 model SCH-REMOTE-250 (FCC ID: R33C4SR250Z and ICID: 7874A-C4SR250Z) and conditions under which it was recordedBody SAR
2.4 GHz @ 10 g
Wi-Fi: 0.464 W/kg
During use, the actual SAR value for this device may be well below the value stated above. The operating power of your mobile device is automatically decreased by the base-station, thereby conserving battery life and minimizing interference with adjacent network cells, if full power is not needed for the call. The amount of power reduction (if any) is dependent on a number of factors such as how close you are to a base-station. In general, the lower the power output by the device, the lower its SAR value.
The World Health Organization has stated that present scientific information does not indicate the need for any special precautions for the use of mobile devices. They recommend that if you are interested in further reducing your exposure then you can easily do so by limiting your usage or simply using a hands-free kit to keep the device away from the head and body.
Français
CET APPAREIL EST CONFORME AUX DIRECTIVES DU CODE 6 DE SÉCURITÉ DE LA SANTÉ CANADA POUR L'EXPOSITION AUX ONDES RADIO.
Votre appareil mobile est un émetteur-récepteur radio. Il est conçu pour ne pas dépasser les limites d'exposition aux ondes radio (champs électromagnétiques de fréquence radio) recommandées par les directives internationales. Les lignes directrices ont été élaborées par Santé Canada et comprennent une marge de sécurité importante destinée à assurer la sécurité de toutes les personnes, indépendamment de l'âge et de la santé.
Les lignes directrices pour l'exposition aux ondes radio utilisent une unité de mesure appelée Débit d'Absorption Spécifique, ou DAS. La limite DAS pour les appareils mobiles est 1,6W/kg.
Les tests de DAS sont effectués en utilisant des positions standards de fonctionnement quand l'appareil fonctionne à son niveau de puissance maximum certifié dans toutes les bandes de fréquences testées. Les valeurs DAS les plus élevées selon les directives de Santé Canada pour ce modèle sont les suivants:
Maximum du DAS pour le modèle SCH-CONTROL-200 (IC ID: 7848A-C4HC200B) et les conditions dans lesquelles il a été enregistréle DAS corps
2.4 GHz @ 10 g
Wi-Fi: 0.464 W/kg
Maximum du DAS pour le modèle SCH-CONTROL-250 (IC ID: 7848A-C4HC250) et les conditions dans lesquelles il a été enregistréle DAS corps
2.4 GHz @ 10 g
Wi-Fi: 0.464 W/kg
Maximum du DAS pour le modèle SCH-CONTROL-800 (IC ID: 7848A-C4HC800) et les conditions dans lesquelles il a été enregistréle DAS corps
2.4 GHz @ 10 g
Wi-Fi: 0.464 W/kg
Maximum du DAS pour le modèle SCH-7IN-TS (IC ID: 7848A-C4TW7C0) et les conditions dans lesquelles il a été enregistréle DAS corps
2.4 GHz @ 10 g
Wi-Fi: 0.464 W/kg
Maximum du DAS pour le modèle SCH-TABLET (IC ID: 7874A-C4TSMC7) et les conditions dans lesquelles il a été enregistréle DAS corps
2.4 GHz @ 10 g
Wi-Fi: 0.464 W/kg
Maximum du DAS pour le modèle SCH-VDS-E (IC ID: 7848A-C4DSC) et les conditions dans lesquelles il a été enregistréle DAS corps
2.4 GHz @ 10 g
Wi-Fi: 0.464 W/kg
Maximum du DAS pour le modèle SCH-VDS-I (IC ID: 7848A-C4DSCINT) et les conditions dans lesquelles il a été enregistréle DAS corps
2.4 GHz @ 10 g
Wi-Fi: 0.464 W/kg
Maximum du DAS pour le modèle SCH-REMOTE-150 (IC ID: 7874A-C4SR150B) et les conditions dans lesquelles il a été enregistréle DAS corps
2.4 GHz @ 10 g
Wi-Fi: 0.464 W/kg
Maximum du DAS pour le modèle SCH-REMOTE-250 (IC ID: 7874A-C4SR250Z) et les conditions dans lesquelles il a été enregistréle DAS corps
2.4 GHz @ 10 g
Wi-Fi: 0.464 W/kg
En cours d'utilisation, la valeur de DAS réel de ce dispositif peut être bien inférieur à la valeur indiquée ci-dessus. La puissance de fonctionnement de votre appareil mobile est automatiquement diminué de la station de base, qui permet de préserver la vie de la batterie et en minimisant les interférences avec les cellules de réseau adjacent, si pleine puissance n'est pas nécessaire pour l'appel. Le montant de la réduction de puissance (le cas échéant) est tributaire d'un certain nombre de facteurs tels que la distance qui vous sépare d'une station de base. En général, plus la puissance de sortie par le dispositif, plus sa valeur DAS.
L'Organisation mondiale de la Santé (OMS) a déclaré que l'information scientifique actuelle n'indique pas la nécessité de prendre des précautions particulières pour l'utilisation de dispositifs mobiles. Ils recommandent que si vous êtes intéressé à réduire encore davantage votre exposition, vous pouvez facilement le faire en limitant votre consommation ou tout simplement en utilisant un kit mains-libres pour maintenir le dispositif éloigné de la tête et du corps.
Statement 2018—Class B Notice for FCC
Modifying the equipment without Cisco's authorization may result in the equipment no longer complying with FCC requirements for Class B digital devices. In that event, your right to use the equipment may be limited by FCC regulations, and you may be required to correct any interference to radio or television communications at your own expense.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
Statement 2019—FCC Declaration of Conformity Information (for USA only)
Product: Cisco Smart+Connected Residential Solution
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Note Equipment must be installed and operated using the relevant manuals and only installed with the correct cables and connectors. Cisco Systems Inc. is not responsible for any radio or television interference caused by unauthorized changes or modifications to this equipment. Unauthorized changes or modifications could void the users authority to operate the equipment.
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Responsible party:
Cisco Systems Inc.
170 West Tasman Drive
San Jose, CA 95134
USA
+408 526-7208FCC Notice to Users
To insure the safety of users, the FCC has established criteria for the amount of radio frequency energy various products may produce depending on their intended usage. This product has been tested and found to comply with the FCC's exposure criteria.
Per 15.407 (g) Manufacturer of this U-NII device is responsible for ensuring frequency stability such that an emission is maintained within the band of operation under all conditions of normal operation as specified in the user guide.
Statement 2022—Class B Notice for Canada
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Industry Canada Notice to Users
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
Statement 295—Class B Warning for Korea
WarningThis is a Class B Device and is registered for EMC requirements for residential use. This device can be used not only in residential areas but in all other areas.
Statement 157—VCCI Compliance for Class B Equipment
WarningThis is a Class B product based on the standard of the VCCI Council. If this is used near a radio or television receiver in a domestic environment, it may cause radio Interference. Install and use the equipment according to the instruction manual.
VCCI-B
Australia / New Zealand Compliance
Compliance of this equipment is confirmed by the following label that is placed on the equipment:
South Korea Compliance
해당무선설비기기는 운용중 전파혼신가능성이 있음English Translation: This radio device has the possibility of radio interference during operation.
2.4GHz RF Warning Message:해당무선설비기기는 운용 중 전파혼신가능성이 있으므로 인명안전과 관련된 서비스는 할 수 없습니다English Translation: This radio device is not allowed to be used for human safety since it has the possibility of radio interference during operation.
EMC (Class B) Warning Message:이기기는가정용(B 급) 전사에 있으며, 전자기 적합성 등록을 인수했다. 그래서 그것은뿐만 아니라 주거 지역뿐만 아니라, 무른 지역에서 사용할 수 있습니다.English Translation: The equipment is for home use (Class B), and has acquired electromagnetic conformity registration. So it can be used not only in residential area but also other areas.
For More Information
For more information about the Cisco Smart+Connected products, please visit:
Cisco Smart+Connected Residential Solution home page:
www.cisco.com/go/smartconnectedresidentialCisco Smart+Connected Residential Solution product documentation:
www.cisco.com/go/smartconnectedresidential/docsCisco Warranty and Related Information:
www.cisco.com/go/warrantyRegulatory Compliance and Safety Information:
www.cisco.com/en/US/products/ps12445/prod_installation_guides_list.htmlCisco Support:
www.cisco.com/cisco/web/support/index.htmlObtaining Documentation and Submitting a Service Request
For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation:
http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html
Subscribe to the What's New in Cisco Product Documentation as an RSS feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service. Cisco currently supports RSS Version 2.0.
©2012-2013 Cisco Systems, Inc. and/or its affiliated entities. All rights reserved.