Cisco Wide Area Application Services Configuration Guide (Software Version 4.0.3)
Index
Downloads: This chapterpdf (PDF - 488.0KB) The complete bookPDF (PDF - 8.63MB) | Feedback

Index

Table Of Contents

Symbols - A - B - C - D - E - F - G - H - I - K - L - M - N - O - P - R - S - T - U - V - W -

Index

Symbols

>12-14

A

AAA accounting

configuring6-30

AAA-based management systems2-26, 6-2

acceleration

about1-6, 12-1

features1-6

TCP settings12-17

accounts

creating7-3

creation process7-2

deleting7-6

local CLI7-2

roles-based7-2

types7-1

viewing7-8

ACL

See also IP ACL

action

full optimization12-10

none12-10

passthrough12-10

TFO only12-10

TFO with DRE12-10

TFO with LZ compression12-10

types12-10

activating devices14-19

adding

print clusters13-13

printers13-10

print server to clients13-24

administrative login authentication and authorization

default6-5

for WAEs6-3

local database

description of6-7

overview of6-2

RADIUS

overview of6-13

TACACS+

overview of6-15

administrative login authentication failover6-26

aggregate settings

for print servers13-27

alarm overload detection, enabling9-14

alarms

device reporting15-3

aliases, for file servers11-23

allowed protocols13-31

application acceleration, about1-6, 12-1

application classifiers

creating12-5

match condition12-9

restoring12-13

application definition

creating12-2

application list, viewing12-11

application policies

restoring12-13

application policy

creating12-5

creation process12-2

position12-16

preparation tasks12-2

types12-7

applications

monitoring12-14, 15-18

application traffic mix chart15-24

assigning

application to a device12-4

application to a device group12-4

core cluster to file server11-19

devices to a preposition directive11-32

devices to more than one device group3-9

assigning devices to device groups3-7

audit trail logs

viewing6-32, 15-17

authentication

default feature values6-5

authentication databases, types of6-3

authentication servers

configuring6-13, 6-15

authorization

default feature values6-5

autodiscover1-16

autoregistration

DHCP server requirements2-9

B

backing up

configuration files10-8

WAAS Central Manager14-9

WAE devices14-11

backup and restore

cms database14-9

baseline groups

configuring3-14

creation process3-13

customizing3-13

switching3-15

types3-12

working with3-12

BIC TCP1-6

bootflags14-15

browser support2-11

C

caching, about1-17

CDP

configuring5-15

cdp enable command4-47

cdp run command4-47

charts

application traffic mix15-24

pass-through traffic mix15-24

traffic reduction15-25

CIFS1-19, 11-2

Cisco.com

obtaining software files from14-2

Cisco Discovery Protocol. See CDP

classifier, creating12-5

classifier report, viewing12-13

clear ip wccp command4-1

clear statistics all command6-25

clear statistics authentication command6-25

clear statistics windows-domain command6-25

CLI user

creating7-4

clock

setting9-6

cms database

backup and restore procedure14-9

cms database backup command14-9

cms database restore command14-11

coherency

age-based validation11-4

compression, about1-4

conditions

modifying or deleting from IP ACLs8-7

configuration group3-5

configuration process11-8

configuring

administrative login authentication and authorization6-8

core cluster11-9

edge device11-11

printer13-30

WCCP on router4-7

WCCP service password4-11

congestion windows, about5-12

connections, creating11-22

controlled shutdown14-20

copy disk ftp command14-10

core cluster

about1-18

assigning to file server11-19

connecting to Edge WAEs11-22

core configuration11-9

core WAE, about1-7

corrupted system images

recovering from14-13

CPU utilization report15-26

creating

accounts7-3

application classifier12-5

application definition12-2

application policy12-5

connections11-22

file blocking directive11-26

local user7-4

match condition12-9

new software file14-3

preposition directive11-28

preposition schedule11-33

current software version

determining14-2

D

database backup14-9

data coherency, about11-4

data concurrency, about11-5

data migration2-29

data redundancy elimination, about1-4

debug command15-26

default status, restoring14-11

deleting

accounts7-6

device groups3-7

locations3-18

roles7-11

software files14-8

device

alarms15-3

autodiscovery1-16

clock setting9-6

rebooting14-20

device groups

about3-1

adding and removing devices3-7

configuring3-5

creating3-3

creation process3-3

deleting3-7

enabling overlap3-9

force group settings3-10

list3-8

overriding settings3-10

setting configuration precedence3-10

types3-2

Device Home window15-6

device locations

about3-16

creating3-16

deleting3-18

device logs, viewing15-18

device registration information

recovering14-17

devices

activating14-19

adding to device groups3-7

adding to multiple device groups3-9

impact of assigning to multiple groups3-12

overriding device group settings3-11

restarting14-20

topology12-14

viewing group assignments3-8

viewing information for15-5

Devices window15-5

DFS, request interception method4-51

DHCP

configuring interfaces for5-8

for autoregistration2-9

interface-level2-10

DHCP server

requirements for autoregistration2-9

disabling WCCP flow redirection4-17

disconnected mode

about11-36

configuring11-37

requirements11-37

disk-based software, missing

recovering from14-16

disk handling

configuring error-handling methods14-18

distributing drivers13-19

DNS, configuring5-16

documentation

related documentsxx

domains

about7-12

adding entities7-14

assigning to user accounts7-14

creating7-13

deleting7-15

modifying and deleting7-15

viewing7-16

double-byte language support11-13

DRE, about1-4

driver repository13-15

drivers

distributing13-19

installing13-17

DSCP11-11, 11-13

dynamic shares, creating11-20

E

edge configuration11-11

edge WAE, about1-7

enable command6-16

enabling

optimization12-20

print banners13-31

print services13-9

SNMP16-8

SNMP agent16-6

traffic statistic collection12-4

WCCP flow redirection4-17

enabling file services

core11-9

edge11-11

entities

adding to domains7-14

EPM adapter

enabling and disabling12-20

errors

disk drives14-18

EtherChannel

configuring5-7

Exec timeout

configuring6-11

explicit congestion notification

about5-12

F

failover, for administrative login authentication6-26

fast offline detection

about9-13

configuring9-12

file blocking directive, creating11-26

File Engines supported2-11

file locking, about11-5

file server aliases11-23

File Server Rename utility10-20

file servers

registering11-15

supported11-7

file services11-8

about1-7

enabling on core11-9

enabling on edge11-11

features1-7

preparing for11-7

flash memory

corrupted14-13

force group settings3-10

full optimization action12-10

G

generic routing encapsulation. See GRE encapsulation

Gigabit Ethernet interfaces

modifying5-5

GRE encapsulation4-14, 4-16

GRE packet forwarding4-16

H

hardware clock9-6

I

increased buffering1-5

installing

print drivers13-17

intelligent message prediction1-6

interface-level DHCP

description2-10

note2-9

interfaces

manually configuring for DHCP5-8

IP access control lists. See IP ACL

IP ACL

adding conditions to8-4

applying to interface8-7

associating with application8-7

conditions, modifying or deleting8-7

configuration constraints8-3

creating new8-4

deleting8-8

on routers2-25

on WAEs2-25

overview8-1

IP addresses

multiple, configuring on single interface5-5

static2-10

IP routes

configuring5-14

ip wccp command4-10

ip wccp redirect-list command4-10

ip web-cache redirect command4-1, 4-10

K

kernel debugger

enabling15-26

L

Layer 2 redirection4-16

LDAP server signing10-12, 10-14

configuring on a Microsoft server6-23

configuring on a WAE6-23

disabling on a WAE6-25

overview of6-23

line console carrier detection

configuring6-12

load balancing1-18, 4-12, 5-8

local CLI accounts, about7-2

local user, creating7-4

locations

about3-16

creating3-16

deleting3-18

location tree

viewing3-18

logging

message priority levels15-9

system events15-15

login

WAE Device Manager10-2

login access

controlling6-8

login authentication

about2-26, 6-2

logs

severity levels in the WAE Device Manager10-37

viewing in the WAE Device Manager10-36

lost administrator passwords

recovering14-15

LZ compression, about1-4

M

match condition, creating12-9

maximum segment size12-19

message logs

viewing15-15

MIBs

supported16-4

MIB traps

configuring using the WAE Device Manager10-10

Microsoft DFS, request interception method4-51

migration, data2-29

missing disk-based software

recovering from14-16

modifying a printer13-30

monitoring

applications12-14, 15-18

system status15-2

using the WAE Device Manager10-28

with SNMP16-1

multiple IP addresses

configuring on single interfaces5-5

N

namespace support1-19

NAS appliances1-16

NAT address9-3

NAT configuration9-3

NetBIOS9-3, 11-12

Network Time Protocol. See NTP

network traffic analyzer tool15-26

notification settings10-17

NTP, configuring9-5

O

obtaining software files14-2

operation prediction and batching1-6

optimization, enabling12-20

P

packet forwarding method4-14

Layer 2 redirection4-16

Layer 3 GRE4-16

packet return4-15

passthrough action12-10

pass-through traffic mix chart15-24

passwords

changing account7-7, 7-8

recovering administrator14-15

PBR, about1-18

policy-based routing

about1-18

configuration of4-40

overview of2-19

verifying next-hop availability4-46

policy report, viewing12-12

port channel interfaces

configuring5-7

load balancing5-8

ports

1392-7

bypassing2-8

disabling11-12

enabling11-12

40502-7

4452-7

disabling11-12

enabling11-12

501392-7

used in WAFS2-7

position, application policy12-16

power failure14-13

preposition

checking status of11-35

viewing in the WAE Device Manager10-24

preposition directive, creating11-28

prepositioning

about11-3

preposition schedule, creating11-33

print banners, enabling and disabling13-31

print clusters

about13-3

adding13-13

print driver distribution, verifying13-22

print drivers

distributing13-19

installing13-17

printer misconfiguration, PostScript error13-32

printers

adding to a WAAS print server13-10

printing a test page13-30

print servers

adding to clients13-24

details, viewing13-26

print services

about1-8, 13-1

configuration process13-6

enabling13-9

planning13-4

Print Services Administration GUI, about13-28

priority levels15-9

R

RADIUS

authentication overview6-13

configuring server6-13

database6-3

default configuration6-5

RAID1-19

RCP services, enabling9-3

real-time transaction logging

configuring15-12

rebooting devices14-20

receive buffer size12-19

recovering

device registration information14-17

from missing disk-based software14-16

lost administrator passwords14-15

system software14-13

redirection methods4-2

registering

file servers11-15

WAEs in the WAE Device Manager10-6

remote login

controlling access6-8

reports

CPU utilization15-26

repository, driver13-15

request redirection methods4-2

rescue system image14-13

restarting devices14-20

restoring

application classifiers12-13

application policies12-13

configuration files10-8

WAAS Central Manager14-9

WAE devices14-11

WAE to default condition14-11

retransmit time multiplier

about5-12

roles

about7-8

assigning to user accounts7-11

creating and managing7-9

deleting7-11

modifying and deleting7-11

viewing7-12

viewing settings7-12

roles-based accounts

about7-2, 7-3

router

configuring WCCP transparent redirection on4-7

router lists, defining for WCCP services4-36

S

SACK, about1-5

schedule, for preposition11-33

secure shell

configuring6-8

host keys6-9

selective acknowledgement1-5

send buffer size12-19

send TCP keepalive12-18

service password

configuring4-11

set ip next-hop verify-availability command4-48

shadow copy for shared folders11-6

shares, request redirection using explicit naming of4-50

show cdp neighbors command4-47

show command utility

for troubleshooting15-4

show version command14-14

shutting down WCCP4-38

Simple Network Management Protocol. See SNMP

site and network planning2-5

SNMP1-20

asset tag setting16-16

community settings16-11

configuration process16-7

configuring using the WAE Device Manager10-9

contact settings16-17

enabling16-8

enabling SNMP agent16-6

group settings16-13

host settings16-10

manager

creating16-3

monitoring with16-1

preparation16-7

security models and security levels16-4

supported MIBs16-4

traps16-9

user settings16-15

versions supported16-3

view settings16-12

software

recovering14-13

software clock9-6

software files

obtaining from Cisco.com14-2

software recovery

using the CD-ROM14-12

software upgrades14-3

for multiple devices14-5

process14-1

software version

determining14-2

spooling space, default13-13

standby groups

of interfaces5-2

standby interfaces

configuring5-2

priority settings5-3

starting WAE components10-5

static IP addresses2-10

static IP routes

configuring5-14

statistics, collecting12-4

stopping WAE components10-5

switching baseline group3-15

system configuration settings9-10

system event logging

configuring15-7

message priority levels15-9

viewing log15-15

system image

recovering14-13

system message log

using15-7

viewing15-15

system software

recovering14-13

system status

monitoring15-2

system status bar

troubleshooting devices15-3

T

TACACS+

authentication and authorization, overview of6-15

database6-3

default configuration6-5

enable password attribute6-16

TACACS+ server

configuring6-15

taskbar icons1-11

TCP

congestion windows5-12

explicit congestion notification5-12

parameter settings5-9

retransmit timer5-12

slow start5-13

tcpdump command15-26

TCP initial window size, about1-5

TCP promiscuous mode service

overview of2-23

Telnet services

enabling6-10

tethereal command15-26

TFO

about1-4

TFO and LZ compression action12-10

TFO features1-4

BIC TCP1-6

compression1-4

increased buffering1-5

selective acknowledgement1-5

TCP initial window size maximization1-5

Windows scaling1-5

TFO only action12-10

TFO with DRE action12-10

time zones

parameter settings for9-6

topology12-14

track command4-48

traffic reduction chart15-25

traffic statistics collection, enabling12-4

traffic statistics report15-18

chart descriptions15-23

transaction logging

about using15-10

configuring15-10

real-time, about using15-14

real-time, configuring15-12

transparent redirection, configuring on a router4-7

traps, enabling16-9

troubleshooting

using show command utility15-4

with TCPdump15-26

with Tethereal15-26

types of application policies12-7

U

Unicode support2-11

upgrading

device groups14-5

process14-1

WAAS Central Manager device14-7

user accounts

adding domain entities7-14

assigning to domains7-14

audit trail logs

viewing6-32, 15-17

changing passwords7-7, 7-8

creating7-3

creation process7-2

deleting7-6

deleting domains7-15

domains7-13

managing7-7, 7-8

modifying and deleting7-6

roles

assigning to7-11

creating7-9

modifying and deleting7-11

viewing7-12

viewing7-8

viewing domains7-16

user authentication. See login authentication

UTC offsets9-8

See also GMT offsets

V

verifying

print driver distribution13-22

version of software14-2

viewing

application list12-11

classifier report12-13

logs in the WAE device Manager10-36

policy report12-12

print server details13-26

role settings7-12

W

WAAS

benefits1-15

interfaces1-8

WAAS Central Manager

backing up14-9

configuring as driver repository13-15

restoring14-9

upgrading14-7

WAAS Central Manager GUI

about1-9

accessing1-9

components1-10

taskbar icons1-11

WAAS CLI, about1-14

WAAS interfaces

CLI1-14

Print Services Administration GUI1-14

WAAS Central Manager GUI1-9

WAE Device Manager GUI1-13

WAAS networks

and IOP interoperability2-12

network planning for2-1

traffic redirection methods2-18

WAAS Print Services Administration GUI, about1-14

WAAS services, about1-4

WAE Device Manager

about1-13, 10-1

Configuration option10-9

Configuration option (WAFS core)10-21

Configuration option (WAFS Edge)10-22

Control option for the WAE10-5

logging out10-3

Notifier tab10-17

quick tour10-3

Utilities option10-18

workflow10-3

WAE devices

backing up14-11

controlled shutdown14-20

modifying configuration properties9-1

restoring14-11

supported2-11

WAE packet return4-15

WAFS

about1-17

configuration process11-8

preparing for11-7

WAFS Cache Cleanup utility10-19

WAFS Core cluster3-5

WAN failures, preparing for11-36

WAN utilization setting11-25

WCCP

about1-18

Cisco Express Forwarding (CEF)4-15

default values

for WAE's general settings4-17

defining router lists4-36

flow redirection

enabling and disabling4-17

ports used2-7

request interception method4-4

shutting down4-38

WCCP-based routing

advanced configuration

for a router4-7

for a WAE4-12

configuration guidelines4-5

overview of2-18

wccp command4-6

WCCP general settings

WAE default values4-17

WCCP service masks

deleting4-25, 4-26

modifying4-25, 4-27, 4-28

WCCP services

displaying list of4-6

web browser support2-11

Windows Authentication

checking the status in the WAE Device Manager10-15

configuring using the WAE Device Manager10-11

Windows name services5-17

Windows scaling, about1-5