Cisco Wide Area Application Services Command Reference (Software Versions 4.0.1 and 4.0.3)
Cisco WAAS Software Commands Summary
Downloads: This chapterpdf (PDF - 375.0KB) The complete bookPDF (PDF - 9.58MB) | Feedback

Cisco WAAS Software Commands Summary

Table Of Contents

Cisco WAAS Software Commands Summary


Cisco WAAS Software Commands Summary


This chapter summarizes the Cisco WAAS 4.0 software commands.

Table 2-1 lists the WAAS commands (alphabetically) and indicates the command mode for each command. The commands used to access configuration modes are marked with a footnote in Table 2-1. The same command may have different effects when entered in a different command mode, so they are listed and documented separately. In Table 2-1, when the first occurrence is entered in EXEC mode, the second occurrence is entered in global configuration mode. When the first occurrence is entered in global configuration mode, the second occurrence is entered in interface configuration mode. In Table 2-1, in the Device Mode column "All" indicates that the particular CLI command is supported in both central manager mode and application accelerator mode.

See Chapter 1, "Using the WAAS Command-Line Interface" for a discussion about using CLI command modes.


Note When viewing this reference online, click the name of the command in the left column of the table to jump to the command page, which provides the command syntax, examples, and usage guidelines.


Throughout this book, the term WAAS device refers collectively to a WAAS Central Manager and a WAE. The term WAE refers collectively to the supported WAE platforms that are running the WAAS software.

Table 2-1 Command Summary 

Command
Description
CLI Mode
Device Mode

(config) aaa accounting

Configures AAA accounting.

global configuration

All

(config) alarm overload-detect

Configures the detection of alarm overload.

global configuration

All

(config) asset

Configures the tag name for the asset tag string.

global configuration

All

(config) authentication

Configures administrative login authentication and authorization parameters.

global configuration

All

(config) auto-register

Enables the discovery of a primary interface on a WAE and its automatic registration with the WAAS Central Manager through DHCP.

global configuration

application accelerator

(config) autosense

Sets the current interface to autosense.

interface configuration

All

(config-if) bandwidth

Sets the specified interface bandwidth to 10, 100, or 1000 Mbps.

interface configuration

All

(config) bypass

Configures the bypass functions on a WAE.

global configuration

application accelerator

cd

Changes the directory.

user-level EXEC and privileged-level EXEC

All

(config) cdp

Enables the Cisco Discovery Protocol (CDP) for the WAAS device.

global configuration

All

(config-if) cdp

Enables CDP on an interface.

interface configuration

All

(config) central-manager

In application accelerator mode, used to specify the IP address of the WAAS Central Manager with which the WAE needs to register. In central manager mode, used to specify the WAAS Central Manager's role and GUI port number.

global configuration

All

clear

Resets the counters and other specified functions.

privileged-level EXEC

All

clock

Manages the system clock.

privileged-level EXEC

All

(config) clock

Sets the summer daylight saving time of day and time zone.

global configuration

All

cms

Configures the parameters for the Centralized Management System (CMS) embedded database.

privileged-level EXEC

All

(config) cms

Schedules the maintenance and enables the Centralized Management System on a specific WAAS device.

global configuration

All

configure1

Enters configuration mode from privileged EXEC mode.

privileged-level EXEC

All

copy cdrom

Copies files from a CD-ROM.

privileged-level EXEC

All

copy compactflash

Copies files from the Compact Flash card.

privileged-level EXEC

All

copy disk

Copies configuration information or files from a disk.

privileged-level EXEC

All

copy ftp

Copies files from an FTP server.

privileged-level EXEC

All

copy http

Copies files from an HTTP server.

privileged-level EXEC

All

copy running-config

Copies information from the current system configuration.

privileged-level EXEC

All

copy startup-config

Copies information from the startup configuration.

privileged-level EXEC

All

copy sysreport

Copies system troubleshooting information.

privileged-level EXEC

All

copy system-status

Copies the system status for debugging reference.

privileged-level EXEC

All

copy tech-support

Copies system information for technical support.

privileged-level EXEC

All

copy tftp

Copies the software image from the TFTP server.

privileged-level EXEC

All

cpfile

Copies a file to the current directory.

user-level EXEC and privileged-level EXEC

All

debug

Configures the debugging options.

Note The following debug options are supported only in the application accelerator device mode: dre, epm, print-spooler, tfo, wafs, and wccp.

privileged-level EXEC

All

(config-std-nacl) delete

Deletes a line from the standard ACL

standard ACL configuration

All

(config-ext-nacl) delete

Deletes a line from the extended ACL

extended ACL configuration

All

delfile

Deletes a file.

user-level EXEC and privileged-level EXEC

All

deltree

Deletes a directory and its subdirectories.

user-level EXEC and privileged-level EXEC

All

(config-std-nacl) deny

Adds a line to a standard access-list that specifies the type of packets that you want the WAAS device to drop.

standard ACL configuration

All

(config-ext-nacl) deny

Adds a line to an extended access-list that specifies the type of packets that you want the WAAS device to drop.

extended ACL configuration

All

(config) device mode

Specifies the device mode of the WAAS device.

global configuration

All

dir

Displays the files in long list format.

user-level EXEC and privileged-level EXEC

All

disable

Turns off the privileged EXEC commands.

privileged-level EXEC

All

disk

Allocates the disks among the cdnfs, cfs, mediafs, and sysfs file systems.

privileged-level EXEC

All

(config) disk

Configures how the disk errors should be handled.

global configuration

All

dnslookup

Resolves a DNS hostname.

user-level EXEC and privileged-level EXEC

All

enable1

Accesses the privileged EXEC commands.

EXEC user

All

(config) end

Exits configuration and privileged EXEC modes.

global configuration

All

(config) exec-timeout

Configures the length of time that an inactive Telnet or SSH session remains open.

global configuration

All

exit

Exits from privileged EXEC mode.

privileged-level EXEC

All

(config) exit

Exits from global configuration mode.

global configuration

All

(config-if) exit

Exits from interface configuration mode.

interface configuration

All

(config-std-nacl) exit

Exits from standard ACL configuration mode.

standard ACL configuration

All

(config-ext-nacl) exit

Exits from extended ACL configuration mode.

extended ACL configuration

All

find-pattern

Searches for a particular pattern in a file.

privileged-level EXEC

All

(config-if) full-duplex

Sets the current interface to the full-duplex mode.

interface configuration

All

(config-if) half-duplex

Sets the current interface to half-duplex mode.

interface configuration

All

help

Provides assistance for the WAAS command-line interface in EXEC mode.

user-level EXEC and privileged-level EXEC

All

(config) help

Provides assistance for the WAAS command-line interface.

global configuration

All

(config) hostname

Configures the hostname of the WAAS device in global configuration mode.

global configuration

All

(config) inetd

Enables FTP, RCP, and TFTP services.

global configuration

All

install

Installs a new image into Flash memory.

privileged-level EXEC

All

(config) interface1

Configures a Fibre Channel, Gigabit Ethernet, Port Channel, or Standby interface. Provides access to interface configuration mode.

global configuration

All

(config) ip

Configures the initial network device configuration settings (for example, the IP address of the default gateway) on a WAAS device.

global configuration

All

(config-if) ip

Configures the IP address, subnet mask, or DHCP IP address negotiation on the interface of the WAAS device.

interface configuration

All

(config-if) ip access-group

Controls the connections on a specific interface by applying a predefined access list.

interface configuration

All

(config) ip access-list1

Creates and modifies the access lists for controlling access to interfaces or applications. Provides access to ACL configuration mode.

global configuration

All

(config) kerberos

Configures user authentication against a Kerberos database.

global configuration

All

(config) kernel

Enables the kernel debugger configuration mode.

global configuration

All

less

Displays the contents of a file using the LESS application.

user-level EXEC and privileged-level EXEC

All

(config) line

Specifies the terminal line settings.

global configuration

All

(config-std-nacl) list

Displays a list of specified entries within the standard ACL

standard ACL configuration

All

(config-ext-nacl) list

Displays a list of specified entries within the extended ACL

extended ACL configuration

All

lls

Displays the files in a long list format.

user-level EXEC and privileged-level EXEC

All

(config) logging

Configures system logging (syslog).

global configuration

All

ls

Lists the files and subdirectories in a directory.

user-level EXEC and privileged-level EXEC

All

mkdir

Makes a directory.

user-level EXEC and privileged-level EXEC

All

mkfile

Makes a file (for testing).

user-level EXEC and privileged-level EXEC

All

(config-if) mode

Changes the Fibre Channel interface operating mode.

interface configuration

All

(config-std-nacl) move

Moves a line to a new position within the standard ACL

standard ACL configuration

All

(config-ext-nacl) move

Moves a line to a new position within the extended ACL

extended ACL configuration

All

(config-if) mtu

Sets the interface Maximum Transmission Unit (MTU) packet size.

interface configuration

All

no debug

Disables debugging functions. (See undebug.)

user-level EXEC and privileged-level EXEC

All

(config) no

Negates a global configuration command or sets its defaults.

global configuration

All

(config-if) no

Negates an interface command or restores it to its default values.

interface configuration

All

(config) ntp

Configures the NTP server.

global configuration

All

ntpdate

Sets the NTP server name.

privileged-level EXEC

All

(config-std-nacl) permit

Adds a line to a standard access-list that specifies the type of packets that you want the WAAS device to permit for further processing.

standard ACL configuration

All

(config-ext-nacl) permit

Adds a line to an extended access-list that specifies the type of packets that you want the WAAS device to permit for further processing.

extended ACL configuration

All

ping

Sends the echo packets.

user-level EXEC and privileged-level EXEC

All

(config) policy-engine application classifier

Defines a WAE's application policy and assigns the policy a name, a classifier, and a policy map.

global configuration

application accelerator

(config) policy-engine application map adaptor EPM

Configures a WAE's application policy with advanced policy map lists of the EndPoint Mapper (EPM) service.

global configuration

application accelerator

(config) policy-engine application map adaptor WAFS accept

Configures a WAE's application policies with the Wide Area File Services (WAFS) accept option.

global configuration

application accelerator

(config) policy-engine application map adaptor WAFS transport

Configures a WAE's application policies with the WAFS transport option.

global configuration

application accelerator

(config) policy-engine application map basic delete

Deletes a specific basic (static) application policy map from the WAE's list of application policy maps.

global configuration

application accelerator

(config) policy-engine application map basic disable

Disables a specific basic (static) application policy map from the WAE's list of application policy maps.

global configuration

application accelerator

(config) policy-engine application map basic insert

Inserts new basic (static) application policy map to the list of application policy maps on a WAE.

global configuration

application accelerator

(config) policy-engine application map basic list

Displays a list of basic (static) application policy maps for a WAE.

global configuration

application accelerator

(config) policy-engine application map basic move

Moves the application policy with the basic policy map list based on L3 or L4 parameters only.

global configuration

application accelerator

(config) policy-engine application map basic name

Configures the WAE's application policy with the basic policy map name.

global configuration

application accelerator

(config) policy-engine application map other optimize DRE

Configures the WAE's optimize DRE command action for non-classified traffic.

global configuration

application accelerator

(config) policy-engine application map other optimize full

Configures the application policy for non-classified traffic with the optimize full command action.

global configuration

application accelerator

(config) policy-engine application map other pass-through

Configures the application policy for non-classified traffic with the pass-through command action.

global configuration

application accelerator

(config) policy-engine application name

Creates a new application definition that specifies general information about an application.

global configuration

application accelerator

(config) policy-engine config

Removes all of the application policy configuration or restores the application policy factory defaults on a WAE.

global configuration

application accelerator

(config) port-channel

Configures the Port Channel load-balancing options.

global configuration

All

(config) primary-interface

Configures a primary interface for the WAAS device.

global configuration

All

(config) print-services

Enables and disables WAAS print services and configures an administrative group.

global configuration

All

pwd

Displays the present working directory.

user-level EXEC and privileged-level EXEC

All

(config) radius-server

Configures the RADIUS parameters on a WAAS device.

global configuration

All

reload

Halts a device and performs a cold restart.

privileged-level EXEC

All

rename

Renames a file.

user-level EXEC and privileged-level EXEC

All

restore

Restores a device to its manufactured default status.

privileged-level EXEC

All

rmdir

Removes a directory.

user-level EXEC and privileged-level EXEC

All

scp

Specifies the SCP client.

privileged-level EXEC

All

script

Checks the errors in a script or executes a script.

privileged-level EXEC

All

setup

Configures the basic configuration settings. Invokes the interactive setup utility.

privileged-level EXEC

All

show aaa accounting

Displays the AAA accounting configuration.

privileged-level EXEC

All

show alarms

Displays information on various types of alarms, their status, and history.

privileged-level EXEC

All

show arp

Displays the ARP entries.

user-level EXEC and privileged-level EXEC

All

show authentication

Displays the authentication configuration.

user-level EXEC and privileged-level EXEC

All

show auto-register

Displays the status of auto registration feature for a WAE.

privileged-level EXEC

application accelerator

show bypass

Displays the bypass configuration of a WAE.

user-level EXEC and privileged-level EXEC

application accelerator

show cdp

Displays the CDP configuration.

user-level EXEC and privileged-level EXEC

All

show clock

Displays the system clock.

user-level EXEC and privileged-level EXEC

All

show cms

Displays the management service information.

user-level EXEC and privileged-level EXEC

All

show debugging

Displays the state of each debugging option.

user-level EXEC and privileged-level EXEC

All

show device-mode

Displays the device mode.

user-level EXEC and privileged-level EXEC

All

show disks

Displays the disk configurations.

user-level EXEC and privileged-level EXEC

All

show flash

Displays the flash memory information.

user-level EXEC and privileged-level EXEC

All

show hardware

Displays the system hardware information.

user-level EXEC and privileged-level EXEC

All

show hosts

Displays the IP domain name, name servers, IP addresses, and host table.

user-level EXEC and privileged-level EXEC

All

show inetd

Displays the status of TCP/IP services.

user-level EXEC and privileged-level EXEC

All

show interface

Displays the hardware interface information.

user-level EXEC and privileged-level EXEC

All

show inventory

Displays the system inventory information.

user-level EXEC and privileged-level EXEC

All

show ip access-list

Displays the information about access lists that are defined and applied to specific interfaces or applications.

user-level EXEC and privileged-level EXEC

All

show ip routes

Displays the IP routing table.

user-level EXEC and privileged-level EXEC

All

show kerberos

Displays the Kerberos authentication configuration.

user-level EXEC and privileged-level EXEC

All

show logging

Displays the system logging configuration.

user-level EXEC and privileged-level EXEC

All

show memory

Displays the memory blocks and statistics.

user-level EXEC and privileged-level EXEC

All

show ntp

Displays the NTP configuration status.

user-level EXEC and privileged-level EXEC

All

show policy-engine application

Displays the display application policy information.

user-level EXEC and privileged-level EXEC

application accelerator

show policy-engine status

Displays the policy-engine high-level information. This information includes the usage of the available resources, which include application names, classifiers, and conditions

user-level EXEC and privileged-level EXEC

application accelerator

show print-services

Displays the print services administrator and process information.

user-level EXEC and privileged-level EXEC

All

show processes

Displays the process status.

user-level EXEC and privileged-level EXEC

All

show radius-server

Displays the RADIUS server information.

user-level EXEC and privileged-level EXEC

All

show running-config

Displays the current operating configuration.

user-level EXEC and privileged-level EXEC

All

show services

Displays information related to services.

user-level EXEC and privileged-level EXEC

All

show smb-conf

Displays the smb-conf configurations.

user-level EXEC and privileged-level EXEC

All

show snmp

Displays the SNMP statistics.

user-level EXEC and privileged-level EXEC

All

show ssh

Displays the status and configuration of the Secure Shell (SSH) service

user-level EXEC and privileged-level EXEC

All

show standby

Displays the information related to the standby interface.

user-level EXEC and privileged-level EXEC

All

show startup-config

Displays the startup configuration.

user-level EXEC and privileged-level EXEC

All

show statistics authentication

Displays the authentication statistics.

user-level EXEC and privileged-level EXEC

All

show statistics content-distribution-network

Displays the status of a WAE or group of WAEs that are registered with the WAAS Central Manager.

user-level EXEC and privileged-level EXEC

central manager

show statistics dre

Displays the Data Redundancy Elimination (DRE) statistics for a WAE.

user-level EXEC and privileged-level EXEC

application accelerator

show statistics dre connection

Displays the DRE connection statistics for a WAE.

user-level EXEC and privileged-level EXEC

application accelerator

show statistics dre peer

Displays the DRE peer statistics for a WAE.

user-level EXEC and privileged-level EXEC

application accelerator

show statistics epm

Displays the DCE-RPC EPM statistics.

user-level EXEC and privileged-level EXEC

application accelerator

show statistics icmp

Displays the ICMP statistics.

user-level EXEC and privileged-level EXEC

All

show statistics ip

Displays the IP statistics.

user-level EXEC and privileged-level EXEC

All

show statistics netstat

Displays the Internet socket connection statistics.

user-level EXEC and privileged-level EXEC

All

show statistics radius

Displays the RADIUS authentication statistics.

user-level EXEC and privileged-level EXEC

All

show statistics services

Displays the services statistics.

user-level EXEC and privileged-level EXEC

All

show statistics snmp

Displays the SNMP statistics.

user-level EXEC and privileged-level EXEC

All

show statistics tacacs

Displays the TACACS+ authentication and authorization statistics.

user-level EXEC and privileged-level EXEC

All

show statistics tcp

Displays the Transmission Control Protocol statistics.

user-level EXEC and privileged-level EXEC

All

show statistics tfo

Displays the Transport Flow Optimization (TFO) statistics for a WAE.

user-level EXEC and privileged-level EXEC

application accelerator

show statistics udp

Displays the User Datagram Protocol (UDP) statistics.

user-level EXEC and privileged-level EXEC

All

show statistics wccp

Displays the WCCP statistics for a WAE.

user-level EXEC and privileged-level EXEC

application accelerator

show statistics windows-domain

Displays the Windows domain configuration.

user-level EXEC and privileged-level EXEC

All

show sysfs

Displays the system file system (SYSFS) information.

user-level EXEC and privileged-level EXEC

All

show tacacs

Displays the TACACS+ configuration.

user-level EXEC and privileged-level EXEC

All

show tcp

Displays the TCP configuration.

user-level EXEC and privileged-level EXEC

All

show tech-support

Displays the system information for Cisco technical support.

user-level EXEC and privileged-level EXEC

All

show telnet

Displays the Telnet services configuration.

user-level EXEC and privileged-level EXEC

All

show tfo accelerators

Displays the Transport Flow Optimization (TFO) information including the accelerators, auto-discovery, buffer manager information, connection and status for a WAE.

user-level EXEC and privileged-level EXEC

application accelerator

show tfo auto-discovery

Displays TFO auto-discovery statistics for a WAE.

user-level EXEC and privileged-level EXEC

application accelerator

show tfo bufpool

Displays TFO buffer pool information for a WAE.

user-level EXEC and privileged-level EXEC

application accelerator

show tfo connection

Displays TFO connection information for a WAE.

user-level EXEC and privileged-level EXEC

application accelerator

show tfo filtering

Displays TFO flow information for a WAE.

user-level EXEC and privileged-level EXEC

application accelerator

show tfo status

Displays TFO status information for a WAE.

user-level EXEC and privileged-level EXEC

application accelerator

show transaction-logging

Displays the transaction logging information for a WAE.

user-level EXEC and privileged-level EXEC

application accelerator

show user

Displays information about a particular user.

user-level EXEC and privileged-level EXEC

All

show users administrative

Displays the administrative users.

user-level EXEC and privileged-level EXEC

All

show version

Displays the software version.

user-level EXEC and privileged-level EXEC

All

show wccp

Displays the WCCP information for a WAE.

user-level EXEC and privileged-level EXEC

application accelerator

show windows-domain

Displays the Windows domain configuration.

user-level EXEC and privileged-level EXEC

All

(config-if) shutdown

Shuts down the specified interface.

interface configuration

All

shutdown

Shuts down the device (stops all applications and operating system).

privileged-level EXEC

All

(config) smb-conf

Manually configures parameters in the Samba configuration file, smb-conf.

global configuration

All

(config) snmp-server access-list

Configures an access control list to allow access through an SNMP agent.

global configuration

All

(config) snmp-server community

Enables SNMP; sets the community string, optionally names the group, and enables the read-write access with the community string.

global configuration

All

(config) snmp-server contact

Specifies the text for the system contact MIB object.

global configuration

All

(config) snmp-server enable traps

Enables the SNMP traps.

global configuration

All

(config) snmp-server group

Defines a user security model group.

global configuration

All

(config) snmp-server host

Specifies the hosts to receive SNMP traps.

global configuration

All

(config) snmp-server location

Specifies the path for MIB object sysLocation.

global configuration

All

(config) snmp-server mib

Configures the persistence for the SNMP Event MIB.

global configuration

All

(config) snmp-server notify inform

Configures the SNMP inform request.

global configuration

All

(config) snmp-server user

Defines a user who can access the SNMP engine.

global configuration

All

(config) snmp-server view

Defines an SNMPv2 MIB view.

global configuration

All

snmp trigger

Creates or deletes SNMP triggers on a MIB variable.

privileged-level EXEC

All

(config-if) speed

Sets the Fibre Channel interface speed.

interface configuration

All

ssh

Allows secure encrypted communications between an untrusted client machine and a WAAS device over an insecure network.

user-level EXEC and privileged-level EXEC

All

(config) sshd

Configures the parameters for the Secure Shell (SSH) service.

global configuration

All

(config) ssh-key-generate

Generates a SSH host key.

global configuration

All

(config-if) standby

Configures an interface to be a backup for another interface.

interface configuration

All

(config) tacacs

Configures the TACACS+ parameters on a WAAS device.

global configuration

All

(config) tcp

Configures the TCP parameters.

global configuration

All

tcpdump

Dumps the TCP traffic on the network.

privileged-level EXEC

All

telnet

Starts the Telnet client.

user-level EXEC and privileged-level EXEC

All

(config) telnet enable

Enables the Telnet services.

global configuration

All

terminal

Sets the terminal output commands.

user-level EXEC and privileged-level EXEC

All

tethereal

Analyzes network traffic from the command line.

privileged-level EXEC

All

(config) tfo optimize

Configures TFO optimization for DRE or full generic optimization on the WAE.

global configuration

application accelerator

(config) tfo tcp keepalive

Configures TFO optimization with TCP keepalive on a WAE.

global configuration

application accelerator

(config) tfo tcp optimized-mss

Configures TFO optimization with optimized-side TCP maximum segment size on a WAE.

global configuration

application accelerator

(config) tfo tcp optimized-receive-buffer

Configures TFO optimization with an optimized-side receive buffer on a WAE.

global configuration

application accelerator

(config) tfo tcp optimized-send-buffer

Configures TFO optimization with an optimized-side send buffer on a WAE.

global configuration

application accelerator

(config) tfo tcp original-mss

Configures TFO optimization with an unoptimized-side TCP maximum segment size on the WAE.

global configuration

application accelerator

(config) tfo tcp original-receive-buffer

Configures TFO optimization with unoptimized-side receive buffer on a WAE.

global configuration

application accelerator

(config) tfo tcp original-send-buffer

Configures TFO optimization with unoptimized-side send buffer on a WAE.

global configuration

application accelerator

traceroute

Traces the route to a remote host.

user-level EXEC and privileged-level EXEC

All

transaction-log

Forces the transaction logging for TFO and export on a WAE.

privileged-level EXEC

application accelerator

(config) transaction-logs

Configures the transaction logging on a WAE.

global configuration

application accelerator

type

Displays a file.

user-level EXEC and privileged-level EXEC

All

type-tail

Displays the last several lines of a file.

user-level EXEC and privileged-level EXEC

All

undebug

Disables the debugging functions. (See debug.)

privileged-level EXEC

All

(config) username

Establishes the username authentication.

global configuration

All

wafs

Performs backup or restores system configuration, and creates a system report on a WAE.

privileged-level EXEC

application accelerator

(config) wccp access-list

Configures the IP access list for inbound Web Cache Coordination Protocol (WCCP) GRE-encapsulated traffic on a WAE.

global configuration

application accelerator

(config) wccp cifs-cache

Enables the CIFS cache service (WCCP Version 2 service 89) and assigns load distribution among the available WAEs.

global configuration

application accelerator

(config) wccp flow-redirect

Enables the WCCP flow redirection on a WAE.

global configuration

application accelerator

(config) wccp router-list

Creates a router list on a WAE for use in the WCCP Version 2 services.

global configuration

application accelerator

(config) wccp shutdown

Sets the maximum time interval after which the WAE will perform a clean shutdown.

global configuration

application accelerator

(config) wccp slow-start

Enables the slow start capability on a WAE.

global configuration

application accelerator

(config) wccp tcp-promiscuous

Configures the TCP promiscuous mode service (WCCP Version 2 services 61 and 62) on a WAE.

global configuration

application accelerator

(config) wccp version

Specifies the WCCP version number.

global configuration

application accelerator

whoami

Displays the name of the current user.

user-level EXEC and privileged-level EXEC

All

windows-domain

Accesses Windows domain utilities.

privileged-level EXEC

All

(config) windows-domain

Configures Windows domain server options.

global configuration

All

write

Writes or erases the startup configurations to NVRAM or to a terminal session, or writes the MIB persistence configuration to disk.

privileged-level EXEC

All

1 Commands used to access configuration modes.