- About This Guide
- Getting Started Installing or Upgrading Cisco Vision Dynamic Signage Director
- Installing Cisco Vision Dynamic Signage Director for the First Time
- Using the Software Manager to Upgrade Cisco Vision Dynamic Signage Director Software, Language Packs, and Fonts
- Verifying the Upgrade
- Upgrading the SV-4K and DMP-2K Media Player Firmware
- Appendix A: Post-Upgrade Checklist
- Appendix B: Port Reference
- Appendix C: CIMC Configuration and Firmware Upgrade Guidelines on the Cisco UCS C220 Server
Cisco Vision Software Installation and Upgrade Guide: Dynamic Signage Director (StadiumVision Director) Release 5.0
Bias-Free Language
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
- Updated:
- October 10, 2016
Chapter: Appendix B: Port Reference
Appendix B: Port Reference
The following tables identify the default ports used by Cisco Vision Dynamic Signage Director:
■
Cisco Vision Dynamic Signage Director Ports
■Cisco Vision Dynamic Signage Director Remote Ports
Cisco Vision Dynamic Signage Director Ports
The Cisco Vision Dynamic Signage Director ports are divided into tables for input and output ports.
Cisco Vision Dynamic Signage Director Input Ports
Table 1 lists the input ports used by all Cisco Vision Dynamic Signage Director servers.
Table 2 lists the additional input ports used by Cisco Vision Dynamic Signage Director server instances only during troubleshooting access from a PC.
Cisco Vision Dynamic Signage Director Output Ports
Cisco Vision Dynamic Signage Director Remote Ports
The Cisco Vision Dynamic Signage Director Remote ports are divided into tables for input and output ports.
Cisco Vision Dynamic Signage Director Remote Input Ports
Table 4 lists the input ports used by all Cisco Vision Dynamic Signage Director Remote servers.
Cisco Vision Dynamic Signage Director Remote Output Ports
Table 5 lists the output ports used by all Cisco Vision Dynamic Signage Director Remote servers.
Media Player Ports
The DMP ports are divided into tables for input and output ports:
■Common Media Player Input Ports
■Input Ports—SV-4K and DMP-2K Only
■Common Media Player Output Ports
■Output Ports—SV-4K and DMP-2K Only
Common Media Player Input Ports
Table 6 lists the input ports used by all media player models.
Input Ports—DMP 4310G Only
In addition to the common media player output ports (Table 6), Table 7 lists the input ports only used by the Cisco DMP 4310G.
Input Ports—SV-4K and DMP-2K Only
In addition to the common media player output ports (Table 6), Table 8 lists the input ports only used by the SV-4K and DMP-2K media player.
Common Media Player Output Ports
Table 9 lists the output ports used by all media player models.
Output Ports—SV-4K and DMP-2K Only
In addition to the common media player output ports (shown in Table 9), Table 10 lists the output ports used only by the SV-4K and DMP-2K media player.
Feedback