Frame Relay Traffic Shaping Flowchart

Available Languages

Download Options

  • PDF     (9.5 KB)
    View with Adobe Reader on a variety of devices
Updated:November 17, 2007
Document ID:14195

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Introduction

The flowchart below illustrates packet flow when you implement Frame Relay traffic shaping.

Prerequisites

Requirements

There are no specific requirements for this document.

Components Used

This document is not restricted to specific software and hardware versions.

Conventions

For more information on document conventions, see the Cisco Technical Tips Conventions.

Flowchart

For further information on traffic shaping, see the Policing and Shaping Overview of the Cisco IOS Sorfware Releases 12.2 Mainline.

frts_fchart.gif

The terms used in this flowchart have the following definitions:

  • FIFO: first-in-first-out

  • CQ: custom queuing

  • PQ: priority queuing

Related Information

Was this Document Helpful?

FeedbackFeedback

Contact Cisco

This Document Applies to These Products