Guest

Fax / Modem over IP

Configuring Fax Relay T.38 with VoIP

Cisco - Configuring Fax Relay T.38 with VoIP

Document ID: 6139

Updated: Jul 04, 2008

   Print

Introduction

The original Cisco Technical Assistance Center (TAC)-authored document at this URL has been replaced by Product Documentation in the Products and Services area of Cisco.com. Refer to the documents provided for more information.

Prerequisites

Requirements

There are no specific requirements for this document.

Components Used

This document is not restricted to specific software and hardware versions.

The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, make sure that you understand the potential impact of any command.

Conventions

Refer to Cisco Technical Tips Conventions for more information on document conventions.

Cisco IOS Software Release 12.2T

Cisco IOS Software Release 12.1T

Other Fax Documents

In order to locate several other fax documents, search for "fax" on Cisco.com using the filters to narrow the search. For example, search for "fax", then filter by "Products and Services". In the results, filter again by "Cisco IOS Software Release 12.2 T".

Related Information

Updated: Jul 04, 2008
Document ID: 6139