Cisco Unity

Cisco Unity Inbox Option not Available in Cisco PCA

Document ID: 110886

Updated: Sep 22, 2009



Sometimes, the Cisco Unity Inbox option does not show up in the Cisco Personal Communications Assistant (PCA) application. This document describes how to troubleshoot this issue.



There are no specific requirements for this document.

Components Used

The information in this document is based on Cisco Unity 4.x and later.

The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, make sure that you understand the potential impact of any command.


Refer to Cisco Technical Tips Conventions for more information on document conventions.


When you access the Cisco Personal Communications Assitant (PCA)application, the Cisco Unity Inbox option does not appear in the PCA application.


You need a license to use Cisco Unity Inbox. So, choose Cisco Unity Tools depot > Administration tools > License info viewer in order to make sure that you have the sufficient license.

Also, choose System > Licensing > License Counts in order to confirm that the number of subscribers does not exceed the number of licenses.

After you complete the previous steps, choose Subscribers > Class of Service > Features Page and check the Cisco Unity Inbox (Visual Messaging Interface) box.

Related Information

Updated: Sep 22, 2009
Document ID: 110886