Unity Express Error: Web Login Failed. JTAPI Login Successful

Available Languages

Download Options

  • PDF     (6.7 KB)
    View with Adobe Reader on a variety of devices
Updated:October 15, 2007
Document ID:99377

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Introduction

This document explains the recommended workaround for the Web login failed. JTAPI login successful error message that appears when a user tries to login to Cisco Unity Express with an already defined, valid username and password, the same credentials used on Cisco Unified Communications Manager 5.x.

Prerequisites

Requirements

Cisco recommends that you have knowledge of these topics:

  • Cisco Unified Communications Manager 5.x (CallManager)

  • Cisco Unity Express

Components Used

The information in this document is based on Cisco Unified Communications Manager 5.x.

The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, make sure that you understand the potential impact of any command.

Conventions

Refer to Cisco Technical Tips Conventions for more information on document conventions.

Problem

Typically, the Web login failed. JTAPI login successful error message appears if the Administrative XML Layer (AXL) service is not enabled on the Cisco Unified Communications Mananger.

ccm-cue-error-1.gif

Solution

Complete these steps in order to enable the AXL service on Cisco Unified Communications Mananger 5.x:

  1. Log into Cisco Unified Communications Manager 5.x.

  2. Choose Cisco Unified Serviceability from the drop down menu in the top right corner.

  3. Choose Tools > Service Activation when the new page loads.

  4. Choose the Cisco CallManager server.

  5. Scroll down to Database+ Admin Services.

  6. Check Cisco AXL Web Service.

  7. Save/Apply changes.

Receive 404 error

The 404 error is received when attempting to access the CUE web interface.

Solution

In order to resolve this issue, check that all the GUI files are in the flash. Then, check that these commands are in the running configuration of the router:

ip http server
no ip http secure-server
ip http path flash:

Related Information

Revision History

Revision Publish Date Comments
1.0
15-Oct-2007
Initial Release

Was this Document Helpful?

FeedbackFeedback

Contact Cisco

This Document Applies to These Products