Idle URL Logo Does Not Display on the Cisco 7960/7940 IP Phone LCD

Available Languages

Download Options

PDF (99.8 KB)
View with Adobe Reader on a variety of devices

Updated:February 3, 2006

Document ID:20020

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Introduction

Prerequisites

Requirements

Components Used

Conventions

Problem

Solution

Related Information

Introduction

This document shows how to display an idle URL logo after a preselected time of inactivity on the Cisco IP Phone 7960/7940 liquid crystal display (LCD).

Prerequisites

Requirements

Cisco recommends that you have knowledge of Cisco CallManager administration before you use the information in this document.

Components Used

The information in this document is based on Cisco CallManager version 3.1 or later.

The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, make sure that you understand the potential impact of any command.

Choose System > Enterprise Parameters from the Cisco CallManager Administration window.
Enter the URL of the logo that you want to display in the URL Idle field.
Enter a value that is greater than zero (0) in the URL Idle Time field.

This value indicates the amount of idle time that passes before activation of the logo that you selected in Step 2. If you set this value to zero, the idle URL logo never displays.

Note: The parameters that display in this window are global parameters. In order to set a different value for a particular phone, change the value of the URL Idle field and the URL Idle Time field under the phone configuration. Otherwise, the Idle Timer field in the phone configuration is empty, as this example shows:

Note: Choose Device > IP phone > search for your phone in order to find this phone configuration.