Unified IP Phone Expansion Module 7914 Displays Garbled Characters

Available Languages

Download Options

  • PDF     (9.2 KB)
    View with Adobe Reader on a variety of devices
  • ePub     (83.2 KB)
    View in various apps on iPhone, iPad, Android, Sony Reader, or Windows Phone
  • Mobi (Kindle)     (69.3 KB)
    View on Kindle device or Kindle app on multiple devices
Updated:February 20, 2012
Document ID:113437

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

    Introduction

    This document describes how to troubleshoot an issue that occurs when a Cisco Unified IP Phone Expansion Module 7914 attached to a Cisco Unified IP Phone 7900 Series displays garbled and unreadable characters.

    Prerequisites

    Requirements

    There are no specific requirements for this document.

    Components Used

    The information in this document is based on the Cisco Unified IP Phone 7900 Series.

    The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, make sure that you understand the potential impact of any command.

    Conventions

    Refer to Cisco Technical Tips Conventions for more information on document conventions.

    Problem

    Some Cisco Unified IP Phone 7914 expansion modules attached to the Cisco Unified IP Phone 7900 Series display garbled and unreadable characters on the screen.

    Solution

    The workaround is to reset the Cisco IP Phone to factory defaults. Refer to Reset 7900 Series IP Phones if Password is Set for information on how to reset the Cisco IP Phone to factory defaults.

    Refer the Cisco Bug ID CSCsb08048 (registered customers only) for more information.

    Related Information

    Revision History

    Revision Publish Date Comments
    1.0
    20-Feb-2012
    Initial Release

    Was this Document Helpful?

    FeedbackFeedback

    Contact Cisco

    This Document Applies to These Products