Guest

Cisco Unified Intelligent Contact Management Enterprise

How to Stop and Start ICM Services Using Windows NT Server Manager Locally And Remotely

Cisco - How to Stop and Start ICM Services Using Windows NT Server Manager Locally And Remotely

Document ID: 20529

Updated: Jul 25, 2006

   Print

Introduction

This document describes how to locally and remotely stop and start services with a Microsoft Windows NT 4.0 server.

Prerequisites

Requirements

Cisco recommends you have knowledge of this topic:

  • Windows NT server administration

Components Used

The information in this document is based on these software and hardware versions:

  • Any version of Windows NT

  • Any version of Cisco Intelligent Contact Management (ICM) that runs on Windows NT

The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, make sure that you understand the potential impact of any command.

Conventions

Refer to the Cisco Technical Tips Conventions for more information on document conventions.

Background Information

If you know how to stop and start services with use of the Windows NT 4.0 administrative tool Server Manager, you can perform these tasks locally and remotely on any Windows NT server or workstation in the domain:

  • Examine ICM services

  • Start ICM services

  • Stop ICM services

This is helpful when you cannot access a Windows NT workstation or server with the use of Telnet or Symantec pcAnywhere.

With the use of Server Manager, you can select the local and/or remote computer and start any ICM or Windows NT service. Examples of these services include CallRouter, Logger, Distributor Admin Workstation (AW), or Ataman Telnet.

Note: You must use Server Manager in order to stop and start services on a Limited AW. This requirement is because the ICM Service Control is not a bundled feature for a Limited AW.

Access Server Manager

Complete these steps in order to access ICM Service Control:

  1. From the Task Bar, click Start.

  2. Choose Programs > Administrative Tools > Server Manager.

    server_manager1.gif

Select Services on a Remote Computer

Complete these steps after you are in Server Manager:

  1. Select the computer name.

  2. Go to the menu bar and choose Computer > Services....

    server_manager2.gif

Examine, Start, and Stop Services

Complete these steps in order to examine, start, and stop the services:

  1. Select the service that you wish to start or stop.

  2. Click Start to start the service.

  3. Click Stop to stop the service.

    server_manager3.gif

Conclusion

At this point, you can start and stop any service for any computer within the Windows NT domain. Of importance to troubleshoot ICM systems remotely are the Ataman Telnetd Server service and the pcAnywhere Host Server service. These services allow you to establish a Telnet session or start a remote client session on the computer.

Related Information

Updated: Jul 25, 2006
Document ID: 20529