An Example to Use the Set Enterprise Call Info Step

Available Languages

Download Options

PDF (107.7 KB)
View with Adobe Reader on a variety of devices
ePub (74.1 KB)
View in various apps on iPhone, iPad, Android, Sony Reader, or Windows Phone
Mobi (Kindle) (71.8 KB)
View on Kindle device or Kindle app on multiple devices

Updated:May 2, 2006

Document ID:70069

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Introduction

Prerequisites

Requirements

Components Used

Conventions

Background Information

How to Perform the Set Enterprise Call Info Step

List of Variables

Step-by-step Procedure

Troubleshoot

Error: Could Not Get Field Data from Enterprise Data Configuration

Solution

Related Information

Introduction

This document demonstrates an example to use the Set Enterprise Call Info step when you configure the Expanded Call Context (ECC) variables and the Call Peripheral variables with the help of the Cisco Desktop Administrator and the Cisco Customer Response Solutions (CRS) Editor.

Prerequisites

Requirements

Cisco recommends that you have knowledge of these topics:

Cisco CallManager
Cisco CRS Script

Components Used

The information in this document is based on these software and hardware versions:

Cisco CallManager version 4.x
Cisco CRS version 4.x

The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, make sure that you understand the potential impact of any command.

Conventions

Refer to Cisco Technical Tips Conventions for more information on document conventions.

Background Information

Use the Set Enterprise Call Info step to send data from one part of your system to another. You can set these enterprise call variables:

Call.CallerEnteredDigits
Call.PeripheralVariable1 to Call.PeripheralVariable10
Call.AccountNumber
Expanded Call Context (ECC) Variables

How to Perform the Set Enterprise Call Info Step

List of Variables

This example demonstrates the addition of these ECC variables and Call Peripheral variables:

User.ecc—ECC Variable (Field)
Newlayout—ECC Variable (Layout)
Call Variable 1
Call Variable 2

Step-by-step Procedure

Complete these steps to set the four variables listed in the List of Variables section:

Use Cisco Desktop Administrator to create one ECC variable named usr.ecc. Complete these steps:
1. Select Start > Programs > Cisco > Desktop > Desktop Administrator (see Figure 1).
  Figure 1 – Sequence to Bring Up Cisco Desktop Administrator
  
  The Cisco Desktop Administrator appears (see Figure 2).
2. Expand the left pane.
3. Select Enterprise Data Configuration > Enterprise Data (see arrow A in Figure 2). The Field List and Layout List appear on the right pane.
  Figure 2 – Cisco Desktop Administrator
4. Click Add in the Field List section (see arrow B in Figure 2). The Field Editor window appears (see Figure 3).
  Figure 3 – Field Editor
5. Select the appropriate value from the Field Index list. The valid field index number is 0 through 199.
6. Type usr.ecc in the Field Name field.
7. Type Display ecc in the Display Name field.
8. Select the Scalar radio button in the Expanded Call Context - ECC section.
9. Click OK (see arrow A in Figure 3).
10. Click Apply in Cisco Desktop Administrator.
Use Cisco Desktop Administrator to create a new layout named newlayout. Complete these steps:
1. Select Start > Programs > Cisco > Desktop > Desktop Administrator (see Figure 1). The Cisco Desktop Administrator appears (see Figure 2).
2. Expand the left pane.
3. Select Enterprise Data Configuration > Enterprise Data (see arrow A in Figure 2). The Field List and Layout List appear on the right pane.
4. Click Add in the Layout List section (see arrow C in Figure 2). The Layout Editor window appears (see Figure 4).
  Figure 4 – Layout Editor
5. Type newlayout in the Layout Name field.
6. Move the necessary variables from the Available Fields list to the Fields in Layout section with the help of the left and right arrows (see arrow A in Figure 4).
  
  Figure 4 displays six selected variables or fields, namely, ANI, DNIS, user.layout, user.ecc, Call Variable 1 and Call Variable 2.
7. Specify the correct order for these variables in the Fields in Layout section with the help of the up and down arrows (see arrow B in Figure 4).
8. Click OK (see arrow C in Figure 4).
9. Click Apply in Cisco Desktop Administrator.
Configure ECC variables for the Set Enterprise Call Info step. In this example, the two ECC variables are user.ecc and newlayout. Complete these steps:
1. Run the Cisco CRS Editor to edit the specific script with the Set Enterprise Call Info step.
2. Right-click the Set Enterprise Call Info step, and select Properties. The Set Enterprise Call Info window appears (see Figure 5).
  Figure 5 – Set Enterprise Call Info: Expanded Call Variable
3. Select the Expanded Call Variables tab (see arrow A in Figure 5).
4. Click Add (see arrow B in Figure 5). The Add ECC Variable window appears (see Figure 6).
  Figure 6 – Add ECC Variable: user.ecc
5. Specify "ecc variable value" in the Value field.
6. Specify "user.ecc" in the Name field.
7. Select Scalar from the Array Index list.
8. Select All in the Token list.
9. Click OK (see arrow A in Figure 6).
10. Click OK (see arrow C in Figure 5).
11. Click Add (see arrow B in Figure 5). The Add ECC Variable window appears (see Figure 7).
  Figure 7 – Add ECC Variable: newlayout
12. Specify "newlayout" in the Value field.
13. Specify "user.layout" in the Name field.
14. Select Scalar from the Array Index list.
15. Select All in the Token list.
16. Click OK (see arrow A in Figure 7).
17. Click OK (see arrow C in Figure 5).
Configure the Set Enterprise Call Info step through the Cisco CRS Editor to set values for the pre-defined Call Peripheral variables. In this example, the two variables are Call.PeripheralVariable1 and CallPeripheralVariable 2. Complete these steps:
1. Run the Cisco CRS Ediitor to edit the specific script with the Set Enterprise Call Info step.
2. Right-click the Set Enterprise Call Info step, and select Properties . The Set Enterprise Call Info window appears (see Figure 8).
  Figure 8 – Set Enterprise Call Info: General
3. Select the General tab (see arrow A in Figure 8).
4. Click Add (see arrow B in Figure 8). The Add Field window appears (see Figure 9).
  Figure 9 – Add Field: Call.PeripheralVariable1
5. Specify "call variable1 value" in the Value field.
6. Select Call.PeripheralVariable1 in the Name list.
7. Select All in the Token list.
8. Click OK (see arrow A in Figure 9).
9. Click Add (see arrow B in Figure 8). The Add Field window appears (see Figure 10).
  Figure 10 – Add Field: Call.PeripheralVariable2
10. Specify "call variable2 value" in the Value field.
11. Select Call.PeripheralVariable2 from the Name list.
12. Select All in the Token list.
13. Click OK (see arrow A in Figure 10).
14. Click OK (see arrow C in Figure 8)