Update the License Count for CRS Version 4

Available Languages

Download Options

PDF (111.2 KB)
View with Adobe Reader on a variety of devices

Updated:October 13, 2005

Document ID:66000

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Introduction

Prerequisites

Requirements

Components Used

Conventions

Update the License Count

Related Information

Introduction

This document describes how to update the license count for Cisco Customer Response Solutions (CRS) Version 4 in a Cisco IP Contact Center (IPCC) Express environment.

Note: If the licenses you add include new features to the Cisco CRS system or change the LDAP directory type Cisco CRS uses, you must reinstall Cisco CRS.

Prerequisites

Requirements

Cisco recommends that you have knowledge of these topics:

Cisco CallManager
Cisco CRS

Components Used

The information in this document is based on these software and hardware versions:

Cisco CallManager version 4.1
Cisco IPCC Express version 4.x

The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, make sure that you understand the potential impact of any command.

Conventions

Refer to Cisco Technical Tips Conventions for more information on document conventions.

Update the License Count

Complete these steps in order to modify the license count for CRS version 4:

Purchase a new license from Cisco.
Log into the CRS Administration page.
Select System > Control Center from the menu bar (see Figure 1).
Figure 1 – System > Control Center

The Control Center page appears (see Figure 2).
Figure 2 – The Control Center Page
Click License Information.

The License Information page appears (see Figure 3).
Figure 3 – License Information
Click Add License(s).

The License Information page displays the Add License(s) fields.
Figure 4 – Add License
Click Browse (see arrow A in Figure 4).
Locate the license file.

If you want to add a single license file, specify the path to the relevant .lic file. If you want to add multiple license files, you can upload each .lic file, one at a time. Alternatively, you can create a .zip file that contains all the files, and upload a single .zip file (see arrow B in Figure 4).

Note: If you use a .zip file, remember that the system uploads only the files in the root of the .zip file.
Click Upload to load the new license file (see arrow C in Figure 4).

If the license loads successfully, this message appears (see arrow A in Figure 5):
```
License file uploaded to the server successfully.
```
Figure 5 – Message that Appears When the License File Loads Successfully
Click Display License(s) to verify the license information (see arrow B in Figure 5).

The Configured Licenses section displays the license information (see Figure 6).
Figure 6 – License Information