This document describes one reason why the the Telephony API (JTAPI) Update Tool fails after an upgrade to Cisco Customer Response Solutions (CRS) version 3.1(3) SR1 and provides a workaround in a Cisco IP Contact Center (IPCC) Express environment.
Refer to Cisco bug ID CSCed57155 (registered customers only) for more information on this issue.
Cisco recommends that you have knowledge of these topics:
Cisco CallManager
Cisco CRS
The information in this document is based on these software and hardware versions:
Cisco CRS 3.1(3) SR1
Cisco CallManager version 3.x
The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, make sure that you understand the potential impact of any command.
Refer to Cisco Technical Tips Conventions for more information on document conventions.
After an upgrade to CRS 3.1(3) SR1, agents are able to log in. However, the JTAPI Update Tool fails. This problem appears with these steps:
Verify the CRS Server and CallManager can ping each other.
Verify the JTAPI client is available on the Publisher.
Run Microsoft Internet Explorer and go to:
http://<CallManager Publisher Name>/compluginsserver/ciscojtapiclient.exe
If it is available, you should receive the File Download window.
Figure 1—File Download
Click Cancel.
Choose Start > Cisco CRA Administrator > JTAPI Update Tool. The Welcome to the JTAPI Client Update Wizard window appears.
Click Next. The Cisco CallManager Database Location window appears.
Enter the CallManager host name, Windows username, and password.
Click Next. This error appears.
Figure 2—Path/File Access Error
This is the error message output:
Could not transfer the JTAPI client from the Callmanager server you specified. ERROR NUMBER: 75 ERROR DESCRIPTION: Path/File access error
This error message is due to a file access problem with CiscoJtapiClient.exe, which by default is located in the C:\Sti\Stage\CiscoPlugins\Server directory on the CRS server. In CRS version 3.1(3) SR1, it is set to read only which prevents the JTAPI Update Tool from replacing the existing CiscoJtapiClient.exe with the new one.
Figure 3—CiscoJTAPIClient.exe Properties
Complete these steps in order to work around this problem:
Delete c:\Sti\Stage\CiscoPlugins\ServerCiscoJtapiClient.exe.
Run the JTAPI Update Tool. How to Use the JTAPI Update Tool with Cisco IPCC Express details the procedure.
Revision | Publish Date | Comments |
---|---|---|
1.0 |
18-Sep-2006 |
Initial Release |