UCCX 8.0: How To Activate the French Prompts for TAPS

Available Languages

Updated:July 11, 2011
Document ID:113070

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Introduction

This document discusses the procedure to activate the French Prompts for TAPS with Cisco Unified Contact Center Express 8.x.

Prerequisites

Requirements

There are no specific requirements for this document.

Components Used

The information in this document is based on the Cisco Unified Contact Center Express 8.0.

The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, make sure that you understand the potential impact of any command.

Conventions

Refer to the Cisco Technical Tips Conventions for more information on document conventions.

Main Task

In this section, you are presented with steps to activate the French Prompts for TAPS with Cisco Unified Contact Center Express 8.x.

Step-by-Step Instructions

Complete these steps in order to activate the French Prompts for TAPS with Cisco Unified Contact Center Express 8.x

  1. Log in to the CUCMAdmin page on the Cisco Unified Communications Manager server.

  2. Navigate to the Bulk Administration/TAPS/User Locales for TAPS menu option.

  3. In the form that appears, ensure that both English and French are in the Selected User Locales box if you want to use both. If you want French only, remove the English language. Only the languages selected on this page are used for prompts in TAPS, as long as you have the .wav files on the UCCX server.

  4. Log in to the Cisco Unified Communications Manager page with SSH, and issue the file list tftp *.aar command.

    The AAR files for the language in question appear. You should see an entry for French_France.aar. This file contains all the prompts necessary to run the TAPS program in French.

  5. If you see the French_France.aar listed, issue the tftp -I <CUCM_IP> GET French_France.aar command.

  6. Use Method 1 or Method 2 in order to activate the French Prompts for TAPS.

Method 1

Complete these steps:

  1. Upload the file with the AAR Management section of the AppAdmin.

  2. Navigate to Applications/Prompt Management, and click the en_US link.

    This puts you at the root of the TAPS section of the prompts. You see all of the TAPS prompts listed as French France_TAPS<name>.wav. For example, French France_TAPS1.wav, French France_TAPS2.wav... French France_TAPSwelcome.wav).

  3. Download all of these files. Be sure to retain the exact file names. For example, there must be a space between French and France. Once you have downloaded them all, you can delete them from the root of the en_US directory.

  4. Add all the downloaded prompts to a zip file so that you can re-upload them. The name of the zip file is not important, but you must know the location and the file name. It also must be a true zip file, not a rar, etc.

  5. In the Prompt Management section, click en_US, and then click TAPS.

  6. Choose the Upload New Prompts link at the top of the page. A file selection window appears. Click the Browse button to select the file, and then click Upload.

Once this is done, all of the French TAPS prompts are available in the TAPS directory.

Method 2

Complete these steps:

  1. Extract the French France.aar file you downloaded from your Cisco Unified Communications Manager with any archive management program.

  2. When you extract this file, there are two folders, META-INF and Prompts.

  3. Open the Prompts folder, and zip all of the .wav files separately.

  4. Login to the UCCX AppAdmin page, and navigate to Applications/Prompt Management.

  5. In the Prompt Management section, click en_US, and then click TAPS.

  6. Choose the Upload New Prompts link at the top of the page. A file selection window appears. Click the Browse button to select the file, and then click Upload.

Once this is done, all of the French TAPS prompts are available in the TAPS directory.

Verify

There is currently no verification procedure available for this configuration.

Troubleshoot

There is currently no specific troubleshooting information available for this configuration.

Related Information

Was this Document Helpful?

FeedbackFeedback

Contact Cisco

This Document Applies to These Products