The Historical Reporting Client (HRC) Scheduler for the Cisco Unified
Contact Center Express 7.0(1) fails to run when HRC is installed on a new Win
XP machine. This document discusses how to troubleshoot this issue.
Cisco recommends that you have knowledge of these topics:
The information in this document is based on the Cisco Unified Contact
Center Express version 7.0(1).
The information in this document was created from the devices in a
specific lab environment. All of the devices used in this document started with
a cleared (default) configuration. If your network is live, make sure that you
understand the potential impact of any command.
Technical Tips Conventions for more information on document
The Historical Report Scheduler fails on a HRC 7.0 install on a new Win
XP machine. The issue is seen on a fresh HRC 7.0 install on a Windows XP
machine. This happens only if an older version of HRC was never installed on
the Win XP machine. This does not occur if it is upgraded from HRC 5.0.
This issue is documented by Cisco Bug ID
(registered customers only)
In order to resolve this issue, perform either of these
Right-click the Scheduler icon that appears in the
status area on your Windows task bar, and choose Stop
Scheduler in order to stop the HRC scheduler.
Go to C:\Program files and create a
Cisco CRS Historical Reports folder. Now, create a
reports subfolder under the newly created Cisco
CRS Historical Reports folder.
Restart the HRC scheduler from Start > Programs >
Cisco UCCX Historical Reports > Cisco UCCX Historical Reports
Now, you can login to HRC scheduler and schedule the