Cisco Unified Communications Manager (CallManager)

Cisco Unified Communications Manager 4.2(3) Installation Interrupts at SQL 2000 SP4

Document ID: 98613

Updated: Sep 12, 2007



This document explains the installing SQL server 2000 SP4 error message that is encountered within the installation of Cisco Unified Communications Manager 4.2, as well as the necessary workaround.



Cisco recommends that you have knowledge of Cisco Unified Communications Manager 4.x for this document.

Components Used

The information in this document is based on these software and hardware versions:

  • Cisco CallManager 4.2

The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, make sure that you understand the potential impact of any command.


Refer to Cisco Technical Tips Conventions for more information on document conventions.


Amid the installation of Cisco CallManager 4.2(3) on the Cisco 7800 Series Media Convergence Server (MCS), the installation process is interrupted when the status is installing SQL server 2000 SP4.


You need to install SQL Server 2000 SP4 or later before you upgrade or install Cisco CallManager 4.2. Install SQL server 2000 SP4 and then rerun the CallManager installation files to resolve the problem.

Related Information

Updated: Sep 12, 2007
Document ID: 98613