Connect a Wireless Computer to a Cisco Small Business VoIP Router

Available Languages

Download Options

  • PDF     (4.3 KB)
    View with Adobe Reader on a variety of devices
  • ePub     (81.2 KB)
    View in various apps on iPhone, iPad, Android, Sony Reader, or Windows Phone
  • Mobi (Kindle)     (66.4 KB)
    View on Kindle device or Kindle app on multiple devices
Updated:December 12, 2008
Document ID:108665

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

    Introduction

    This article is one in a series to assist in the setup, troubleshooting, and maintenance of Cisco Small Business products.

    Q. How do I connect to my Wireless Network using XP's Wireless Zero Configuration Utility?

    A.

    This article assumes that your wireless adapter is already properly installed and/or enabled on the computer.

    Before trying to connect your wireless adapter to a Linksys Wireless router, please know your SSID, Wireless Security and/or Network Key. If you do not know your wireless settings, click here. In order to connect to the wireless network, complete these steps:

    Note: These steps are for Windows XP Service Pack 2.

    Connect to Wireless Networks Using XP's Wireless Zero Configuration

    Follow this step to connect to your wireless network using XP's Wireless Zero Configuration.

    Step 1:
    Right-click the Wireless Network Connection icon at the bottom-right of the screen, and select View Available Wireless Networks.

    Step 2:
    Select your wireless network's name or SSID, and click Connect.

    Related Information

    Revision History

    Revision Publish Date Comments
    1.0
    26-Nov-2008
    Initial Release

    Was this Document Helpful?

    FeedbackFeedback

    Contact Cisco

    This Document Applies to These Products