Guest

Cisco Small Business Voice Gateways and ATAs

Check the Wireless Settings on a Cisco Small Business VoIP Router

Document ID: 108664

Updated: Dec 12, 2008

   Print

Contents

Introduction
How do I get the wireless settings on my network?
Related Information

Introduction


This article is one in a series to assist in the setup, troubleshooting, and maintenance of Cisco Small Business products.

Q. How do I get the wireless settings on my network?

A.

The wireless settings that you need to note are:

a.) SSID
b.) SSID Broadcast
c.) Wireless Security

In order to check the wireless settings on the Cisco Small Business router, complete these steps:

Checking the Wireless Settings on the Cisco Small Business Router

Step 1:
Access the router's web-based setup page. For instructions, click here.

Step 2:
When the router's web-based setup page appears, click Wireless.

Step 3:
Look for Wireless Network Name (SSID). If it is still set to "linksys", change it to something unique and note if Wireless SSID Broadcast is set to Enable or Disable.

Step 4:
Click Wireless Security, and note the current Security Mode.

If Security Mode is set to WEP:

If Security Mode is set to WPA:

Step 5:

Click .

 


Related Information

Updated: Dec 12, 2008
Document ID: 108664