Connect a Wireless Adapter to a Cisco Small Business VoIP Router

Available Languages

Download Options

PDF (5.4 KB)
View with Adobe Reader on a variety of devices
ePub (74.3 KB)
View in various apps on iPhone, iPad, Android, Sony Reader, or Windows Phone
Mobi (Kindle) (67.3 KB)
View on Kindle device or Kindle app on multiple devices

Updated:December 12, 2008

Document ID:108660

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Introduction
How do I connect a wireless adapter to a Cisco Small Business VoIP router?
Related Information

Introduction

This article is one in a series to assist in the setup, troubleshooting, and maintenance of Cisco Small Business products.

Q. How do I connect a wireless adapter to a Cisco Small Business VoIP router?

This article assumes that your wireless adapter is already properly installed and/or enabled on the computer. Before you try to connect your wireless adapter to a Cisco Small Business wireless router, know the following: SSID, Wireless Security and/or Network Key. If you do not have these settings, click here.

Configure your Wireless Adapter to Connect to a Cisco Small Business Wireless Router

Note: These steps are for Windows XP with Service Pack 2.

Step 1:
Right-click the Wireless Network Connection icon at the bottom-right of the screen, and select View Available Wireless Networks.

Step 2:
Select your wireless network's name or SSID, and click Connect.

If WEP is enabled on the router:

If WPA is enabled on the router:

Step 3:

Click .