Disable SSID Broadcast on a Cisco Small Business VoIP Router

Available Languages

Download Options

  • PDF     (4.1 KB)
    View with Adobe Reader on a variety of devices
  • ePub     (81.0 KB)
    View in various apps on iPhone, iPad, Android, Sony Reader, or Windows Phone
  • Mobi (Kindle)     (66.0 KB)
    View on Kindle device or Kindle app on multiple devices
Updated:December 12, 2008
Document ID:108647

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

    Introduction

    This article is one in a series to assist in the setup, troubleshooting, and maintenance of Cisco Small Business products.

    Q. How do I disable the SSID broadcast on my Cisco Small Business VoIP router?

    A.

    One way to secure your wireless network is to disable the SSID broadcast. This procedure prevents other users from detecting your SSID or your wireless network name when they attempt to view available wireless networks in your area. In order to disable the SSID broadcast, complete these steps:

    Disable SSID Broadcast

    Step 1:
    Access the router's web-based setup page. For instructions, click here .

    Step 2:
    When the router's web-based setup page appears, click Wireless, look for Wireless SSID Broadcast, and select Disable.

    Step 3:

    Click .

    Step 4:
    Reconnect to your wireless network by creating a profile on the wireless computer's configuration utility.

    Related Information

    Revision History

    Revision Publish Date Comments
    1.0
    26-Nov-2008
    Initial Release

    Was this Document Helpful?

    FeedbackFeedback

    Contact Cisco

    This Document Applies to These Products