Guest

Cisco Small Business Voice Gateways and ATAs

Access the Web-Based Setup Page of the VoIP Router

Document ID: 108646

Updated: Dec 12, 2008

   Print

Introduction

This article is one in a series to assist in the setup, troubleshooting, and maintenance of Cisco Small Business products.

Refer to Cisco Technical Tips Conventions for more information on document conventions.

Q. How do I access the web-based setup page of the router?

A. All routers have a built-in web-based setup page that allows you to customize settings and set up advanced properties.

Note: Before you access the web-based setup page of the router, make sure the router is powered on and the computer is wired to one of the Ethernet ports on the router, for example, 1, 2, 3 or 4.

Complete these steps:

  1. Open a web browser such as Internet Explorer.
  2. Go to the Address bar and enter the IP Address of your router then press Enter. For example, 192.168.15.1 is the default IP of most VOIP routers.

    setup-voip-108646-01.gif

    Note: If the IP address of the router has been changed, type the IP address of the router in the Address bar instead.

    The IP address of the router can be changed by these factors:
    • If you run the setup CD of the router

    • If you change it on the web-based setup page of the router

    If you forgot the IP address of the router, you can try one of these steps:
    • Check the IP address of the router.

    • Press the Reset button at the back of the router for 30 seconds.

    Note: This procedure resets your router to factory defaults. Any settings on the router are erased. The IP address of the router will be 192.168.15.1 and the password is admin after you reset it.

  3. A new window prompts for a User name and Password. Type admin for User name and Password, since admin is the default user name password, and then click OK.

    setup-voip-108646-02.gif

    Note: If the password of the router has been changed, type the new password of the router in the Password field instead.

    The password of the router can be changed by these factors:
    • If you run the setup CD of the router

    • If you change it on the web-based setup page of the router

Related Information

Updated: Dec 12, 2008
Document ID: 108646