Guest

Cisco Small Business Voice Gateways and ATAs

Set up a PAP2 Behind a Cisco Small Business Router

Set up a PAP2 Behind a Cisco Small Business Router

Document ID: 108754

Updated: Dec 12, 2008

   Print

Contents

Introduction
How do I set up a PAP2 Behind a Cisco Small Business Router?
Related Information

Introduction


This article is one in a series to assist in the setup, troubleshooting, and maintenance of Cisco Small Business products.

Q. How do I set up a PAP2 Behind a Cisco Small Business Router?

A.

Setting-Up a PAP2 Behind a Linksys Router

Step 1:
Pick up the handset, and dial ****110#. Write down the IP address.

Step 2:
Access the router's web-based setup page. For instructions, click here.

Step 3:
Click Applications and Gaming, and open ports 5060 - 5061 and 16384 - 16482. Note that the IP address in the box is just an example. You have to use the IP address of the PAP2 that you took note of when you dialed ***110#. For instructions on how to set up Port Forwarding, click here.

Step 4:
Click Save Settings.

Related Information

Updated: Dec 12, 2008
Document ID: 108754