This series of interactive documents uses a typical head office and branch
office in order to demonstrate some common voice network configurations. This
interactive diagram allows you to view network configurations:
This image is interactive!
Click a component to view configuration
and troubleshooting information.
If you followed the steps described in this document, you should be able to
log in from any IP phone.
On the IP phone, press the Services button, and then select the Extension
The user name in this case is adgjm, and the PIN is 12345.
If the login is successful, the phone goes into reset mode and then comes up
with the new DN (in this example, 2015) that is assigned to the Extension Mobility
User Device Profile.
To log out of Extension Mobility on an IP phone, press the Services
button, and follow the onscreen instructions.
Note: If you did not subscribe your user device profile to the Extension
Mobility service, you will not be able to log out from the IP phone. You must
complete a manual log ot from the Phone Configuration section of the Unified
CallManager Admin page (granted you have access).