Guest

Cisco Small Business Voice Gateways and ATAs

Making an Outbound Call on SPA3102

Document ID: 108738

Updated: Dec 12, 2008

   Print

Contents

Introduction
How can I make an Outbound PSTN Call on SPA-3102?
Related Information

Introduction


This article is one in a series to assist in the setup, troubleshooting, and maintenance of Cisco Small Business products.

Q. How can I make an Outbound PSTN Call on SPA-3102?

A.

Step 1:
Access the SPA-3102's web-based setup page. For instructions, click here.

Step 2:
Click Voice, Admin Login, then advanced.

Step 3:
Click Line 1 and look for Proxy and Registration.

Step 4:
Under Proxy, enter the VOIP Proxy settings in the field provided.

Step 5:
Under Outbound Proxy, enter the VOIP Outbound Proxy settings in the field provided.

Step 6:
Set Use Outbound Proxy to yes.

Step 7:
Under Password, enter the subscriber password in the field provided.

Step 8:
Under User ID, enter the User ID in the field provided.

Step 9:

Click .

Step 10:
Click PSTN Line.

Step 11:
Under Proxy enter the VOIP Proxy settings on the field provided.

Step 12:
Under Outbound Proxy, enter the VOIP Outbound Proxy settings in the field provided.

Step 13:
Set Use Outbound Proxy to yes.

Step 14:
Under Password, enter the subscriber password in the field provided.

Step 15:
Under User ID, enter the User ID in the field provided.

Step 16:

Click .

Step 17:

Click Line 1 and look for Dial Plan.

Step 18:
Change the default Dial Plan from "(*xx|[3469]11|0|00|[2-9]xxxxxx|1xxx[2-9]xxxxxxS0|xxxxxxxxxxxx.)" to "(xx.|<#9,:>xx.<:@gw0>)" in order to dial a VOIP number and #9 to dial a PSTN number for outbound calls.

 

Related Information

Updated: Dec 12, 2008
Document ID: 108738