Guest

Cisco Small Business Voice Gateways and ATAs

Accessing the PAP2 Remotely

Document ID: 108744

Updated: Dec 12, 2008

   Print

Contents

Introduction
How can I access on the PAP2 device remotely?
Related Information

Introduction


This article is one in a series to assist in the setup, troubleshooting, and maintenance of Cisco Small Business products.

Q. How can I access on the PAP2 device remotely?

A.

Accessing the PAP2 Remotely

Step 1:
If the PAP2 is behind a router, make sure that you have forwarded the necessary ports. If you have a Linksys router, click here for instructions.

Step 2:
Access the PAP2's web-based setup page. For instructions, click here.

Step 3:
Click Admin Login and then switch to advanced view.

Step 4:
Click System and set the Enable Web Server to 'yes' and enter the Web Server port. Port 80 is the default value for web server port.

Step 5:
Click Save Settings.



Related Information

Updated: Dec 12, 2008
Document ID: 108744