Document ID: 108744
Updated: Dec 12, 2008
How can I access on the PAP2 device remotely?
This article is one in a series to assist in the setup, troubleshooting, and maintenance of Cisco Small Business products.
Q. How can I access on the PAP2 device remotely?A.
Accessing the PAP2 Remotely
If the PAP2 is behind a router, make sure that you have forwarded the necessary ports. If you have a Linksys router, click here for instructions.
Access the PAP2's web-based setup page. For instructions, click here.
Click Admin Login and then switch to advanced view.
Click System and set the Enable Web Server to 'yes' and enter the Web Server port. Port 80 is the default value for web server port.
Click Save Settings.