Guest

Cisco Small Business Network Storage Systems

Saving and Restoring the NSS2050s Configuration

Saving and Restoring the NSS2050s Configuration

Document ID: 109519

Updated: Jan 26, 2009

   Print

Introduction


This article is one in a series to assist in the setup, troubleshooting, and maintenance of Cisco Small Business products (formerly Linksys Business Series).

Q. How do back up and restore my NSS2050's configuration?

A.

Saving the NSS2050's configuration

Step 1:
Access the web interface of the NSS2050. For instructions on how to access the web interface, click here

Step 2:
Once logged in, click on Admin > Configuration. Select the RAID and Volume where the configuration will be saved to and restored from then click on Update



Step 3:
Once the location has been selected, click on Save.

Restoring the NSS2050's configuration

Step 1:
After a configuration has been saved, click on Restore.



Step 2:
All the saved configurations will appear in the Configuration list. Click on Full Restore to upload the saved configuration.



Step 3:
The system will automatically reboot after a successful restore. Close the NSS2050's web interface if you're prompted to.

Step 4:
Log back in to the NSS2050's web interface and check System > Status if the configuration has been properly restored.

Related Information

Updated: Jan 26, 2009
Document ID: 109519