Guest

Cisco Small Business Network Storage Systems

Creating Volume and Home Directory on the NSS2050

Creating Volume and Home Directory on the NSS2050

Document ID: 109515

Updated: Jan 26, 2009

   Print

Introduction


This article is one in a series to assist in the setup, troubleshooting, and maintenance of Cisco Small Business products (formerly Linksys Business Series).

Q. How do I create Volume and Home Directory on the NSS2050?

A.

Creating Volume on NSS2050

Step 1:
Access the web interface of the NSS2050. For instructions on how to access the web interface, click here.

Step 2:
Once logged in, click Storage > Volume.

Step 3:
On the New Volume section, select the array on where the volume will be created on the Array drop-down menu. Enter a volume name on the Name field and enter a desired Size for the volume. Volume sizes can be on MB, GB or TB.

Step 4:
To encrypt the volume, check Encrypted and enter a password. The password needs to be at least 8 alphanumeric characters.

Step 5:
Click Add to start creating the volume.

Creating Home Directory on NSS2050

Step 1:
Access the web interface of the NSS2050. For instructions on how to access the web interface, click here

Step 2:
Once logged in, click Access > Options.

Step 3:
On the User/Group Settings section, select the Home Directory Location from the drop-down menu.

Step 4:
Click on Update to save the changes.

Related Information

Updated: Jan 26, 2009
Document ID: 109515