Guest

Cisco Small Business Network Storage Systems

Saving and Restoring the NSS2000s Configuration

Saving and Restoring the NSS2000s Configuration

Document ID: 109528

Updated: Jan 26, 2009

   Print

Introduction

This article is one in a series to assist in the setup, troubleshooting, and maintenance of Cisco Small Business products (formerly Linksys Business Series).

Q. How do I back up and restore my NSS2000's configuration?

A.

Saving the NSS2000's configuration

Step 1:
Access the web interface of the NSS2000. For instructions on how to access the web interface, click here .

Step 2:
Once logged in, click on Admin > Configuration. Select the RAID and Volume where the configuration will be saved to and restored from then click on Update.



Step 3:
Once the location has been selected, click on Save.

Restoring the NSS2000's configuration

Step 1:
After a configuration has been saved, click on Restore.



Step 2:
All the saved configurations will appear in the Configuration list. Click on Full Restore to upload the saved configuration.

Step 3:
The system will automatically reboot after a successful restore. Close the NSS2000's web interface if you're prompted to.

Step 4:
Log back in to the NSS2000's web interface and check System > Status if the configuration has been properly restored.

Related Information

Updated: Jan 26, 2009
Document ID: 109528