This article is one in a series to assist in the setup, troubleshooting, and maintenance of Cisco Small Business products (formerly Linksys Business Series).
Q. How do I configure the Network Link IP of the NSS2000?
From the Manager Menu, click Network IP.
The Network IP page appears listing each interface.
Click Edit on the row of the interface you want to configure.
The Network Link Configuration page appears.
Select one of the following:
Use the Following IP Address: Enter the IP configuration details manually for the IP
address, netmask, and gateway, in dotted-quad notation (i.e., set of four digits
separated by periods where each digit is in the range of 0-255).
Click Update for settings to take effect.