Enable/Disable Web Interface on SPA300/SPA500 Series IP Phone

Available Languages

Download Options

PDF (512.7 KB)
View with Adobe Reader on a variety of devices
ePub (467.5 KB)
View in various apps on iPhone, iPad, Android, Sony Reader, or Windows Phone
Mobi (Kindle) (568.0 KB)
View on Kindle device or Kindle app on multiple devices

Updated:August 17, 2017

Document ID:SMB1992

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Enable/Disable Web Interface on SPA300/SPA500 Series IP Phone

Objectives

The SPA300/SPA500 Series IP phones can be accessed through a web interface. The web interface displayes answered, placed, and missed calls along with device information and statistics specific to that phone. By default, the web interface is enabled on each phone.

This document explains how to enable or disable the web interface on the SPA300/SPA500 Series IP Phone.

Applicable Devices

• SPA300 Series IP Phone
• SPA500 Series IP Phone

Step-by-Step Procedure

Enable or Disable the Web Interface

Step 1. Press the Setup button on the IP phone to bring up the Setup menu.

Step 2. Select Settings and press Select to bring up the Settings menu.

Step 3. Select Security Configuration and press Select to bring up the Security Configuration menu.

Step 4. If there is a locked padlock at the top of the screen, press Star, Star, Pound on the keypad to unlock the settings so that they can be edited.