Sx550X, Sx350X, Sx250: PSE will Supply Power to Catalyst PSE Ports

Available Languages

Download Options

  • PDF     (3.1 KB)
    View with Adobe Reader on a variety of devices
  • ePub     (46.4 KB)
    View in various apps on iPhone, iPad, Android, Sony Reader, or Windows Phone
  • Mobi (Kindle)     (64.7 KB)
    View on Kindle device or Kindle app on multiple devices
Updated:December 12, 2018
Document ID:SMB5770

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Sx550X, Sx350X, Sx250: PSE will Supply Power to Catalyst PSE Ports

Date Identified

May 31, 2016

Date Resolved

June 5, 2017

Products Affected

Model

Firmware Version

Fixed In

Sx550X, Sx350x, Sx250

2.1.0.63

2.3.0.130

Problem Description

When the PoE port of Sx550X, Sx350X or Sx250 switch is connected to the PoE port of 3750 Catalyst switch, the former will provide power to the latter through PoE.

Resolution

This issue is fixed when you upgrade to the firmware version 2.3.0.130. To upgrade, click here for instructions.

 

Revision History

Revision Publish Date Comments
1.0
12-Dec-2018
Initial Release

Was this Document Helpful?

FeedbackFeedback

Contact Cisco

This Document Applies to These Products