RV130W: Latam/RV130W/Default Inbound Access Rule Policy

Available Languages

Download Options

  • PDF     (2.8 KB)
    View with Adobe Reader on a variety of devices
  • ePub     (45.4 KB)
    View in various apps on iPhone, iPad, Android, Sony Reader, or Windows Phone
  • Mobi (Kindle)     (63.0 KB)
    View on Kindle device or Kindle app on multiple devices
Updated:December 12, 2018
Document ID:SMB5647

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

RV130W: Latam/RV130W/Default Inbound Access Rule Policy

Date Identified

May 25, 2017

Date Resolved

N/A

Products Affected

Model

  Firmware Version  

RV130W   

1.0.3.22

Problem Description

If an Allow Access Control List (ACL) has been configured to allow traffic from a specific host or network, and then a Block ACL is configured, the Block ACL will deny traffic that is supposed to be permitted.

Current Status

Beta software version 1.0.3.25 fixed this issue and the public firmware will be published in the next official firmware release of RV130W.

Revision History

Revision Publish Date Comments
1.0
12-Dec-2018
Initial Release

Was this Document Helpful?

FeedbackFeedback

Contact Cisco