C880 M4 - How to Collect System Event Log Bundle

Available Languages

Download Options

  • PDF     (142.8 KB)
    View with Adobe Reader on a variety of devices
  • ePub     (202.5 KB)
    View in various apps on iPhone, iPad, Android, Sony Reader, or Windows Phone
  • Mobi (Kindle)     (168.1 KB)
    View on Kindle device or Kindle app on multiple devices
Updated:September 14, 2016
Document ID:200657

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Introduction

This article describes how to collect the System Event log bundle from a Cisco C880 M4 server.

Steps

1) Connect to the C880 M4 MMB browser graphical user interface (GUI). 

2) Click on System Event Log on the left menu and then click on Download.



3) A progress bar will get displayed as the firmware collects the logs and compress them.



4) Once complete, a link will be provided with the System Event Log bundle. The file name will be in the format sel_YYYYMMDDHHMMSS.tgz.



TAC Authored

Contributed by Cisco Engineers

Was this Document Helpful?

FeedbackFeedback

Contact Cisco