Guest

Cisco VPN 3000 Series Concentrators

VPN 3000 Concentrator and VPN Client Verisign Certificates Installation Procedure

Document ID: 28142

Updated: Jan 14, 2008

   Print

Introduction

This document outlines the procedure used to install Verisign Certificates on the Cisco VPN Client and VPN 3000 Concentrator.

Prerequisites

Requirements

There are no specific requirements for this document.

Components Used

The information in this document is based on these software and hardware versions:

  • Verisign Certification Authority (CA) Server

  • Cisco VPN 3000 Concentrator 4.x

The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, make sure that you understand the potential impact of any command.

Conventions

For more information on document conventions, refer to the Cisco Technical Tips Conventions.

Configure the Verisign CA Server and VPN 3000 Concentrator

Complete these steps to configure the Verisign CA Server.

  1. Browse to the Verisign CA server control panel page (admin page).

  2. Select Configuration > Install CA.

    Text similar to this appears:

    Because your organization is using the Private certificate service, your 
    IPSec certificates are issued under a private Certification Authority  (CA)
    set up specifically for your organization (as opposed to VeriSign's  
    public CA). For your network devices to use the IPSec certificates issued by 
    your CA, your private CA's certificate must reside in the network applications.  
    
    
    !--- Output suppressed.
    
    		  
     -----BEGIN CERTIFICATE-----
    
    
    !--- Output suppressed.
    
     -----END CERTIFICATE----- 		  

    Alternatively, you can download a .tar format zipped file that can be decompressed with WinZip. The .tar file contains these four files:

    • ca.509

    • ca.info

    • ca.nx509 - This file is the actual certificate that you cut and paste. Save this file on your PC.

    • Long string of characters.509

  3. Select Administration > Certificate Management > Install > CA Certificate > Upload File from Workstation.

    vpn3k-verisign-install-1.gif

  4. Click Browse and direct the file to the location of your CA ROOT certificate previously saved on your PC.

  5. Click Install.

  6. Select Administration > Certificate Management to view CA Root Certificate.

    vpn3k-verisign-install-2.gif

  7. Choose Click here to enroll with a Certificate Authority.

    vpn3k-verisign-install-3.gif

  8. Select Administration > Certificate Management > Enrollment > Identity Certificate.

    vpn3k-verisign-install-4.gif

  9. Click Enroll via PKCS10 Request (Manual).

    vpn3k-verisign-install-5.gif

  10. Fill out the form as needed.

  11. Click Enroll.

    A separate window opens with "Begin new certificate request". Copy this certificate request to Notepad.

  12. Select Administration > Certificate Management and ensure that the status of the ID certificate states "in progress".

    vpn3k-verisign-install-6.gif

    Note: The above graphic has no enrollment request. However, if there was one, the full line is populated with the required information.

  13. Browse to the Versign CA enrollment page.

  14. Choose the generate your certificate signing request option. The options provided are to upload from file or text.

  15. Use the text format.

  16. Enter this authentication information:

    • Full Name

    • Email Address

    • Title

    • Domain name and IP address (leave this blank)

  17. Choose a challenge phrase.

    Note: You can choose to leave this blank because it is not required.

  18. Enter comments.

    Note: You can choose to leave this blank because it is not required.

  19. Click Submit.

  20. After Verisign states that "your certificate request has been submitted successfully", browse to the Verisign CA control page and click on Certificate Management.

  21. Click on Process request.

  22. Click Approve to send the first email back to the end user that states the certificate has been approved and the second email with the actual ID certificate.

  23. On the VPN 3000 Concentrator, select Administration > Certificate Management.

  24. Under the ID Certificates Action section, look for < INSTALL >.

  25. Click Install.

    Two options appear:

    • upload

    • cut and paste

  26. Click Install.

    At this point, you are brought back to the Certificate Management page and you can see the CA certificate and the ID certificate. The certificates are successfully installed.

Troubleshoot

Problem: The "Error installing SSL certificate: Incomplete chain" displays within SSL certificate installation on the VPN 3000 Series Concentrator.

Cause: This parse error displays if the VPN concentrator does not have a root Certificate Authority (CA) certificate installed.

Resolution: Regardless of whether Simple Certificate Enrollment Protocol (SCEP) or manual enrollment is used, the VPN concentrator must have a root CA installed if third-party certificates are used. In order to obtain and install the Secure Socket Layer (SSL) certificates, perform this procedure:

  1. Obtain and install the root CA certificate.

  2. Create an enrollment request for one or more identity certificates.

  3. Request an identity certificate from the same CA that issued the root CA certificate.

  4. Install the identity certificate on the VPN concentrator.

  5. Enable Certificate Revocation List (CRL) checking and caching.

  6. Enable Certificates.

Related Information

Updated: Jan 14, 2008
Document ID: 28142