What does the log message "verified no" mean?

Available Languages

Download Options

  • PDF     (6.0 KB)
    View with Adobe Reader on a variety of devices
Updated:August 15, 2014
Document ID:118173

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Introduction

This document describes the meaning of "verified no" on incoming SMTP connections.

Background Information

Here is an example of a "verified no" log message:

Wed Nov 17 10:00:20 2004 Info: New SMTP ICID 353419258 interface
PublicNet(10.111.123.234) address 103.102.100.99 reverse dns 
host unknown verified no

Log messages of this type indicate the following:

  1. The IP address does not reverse resolve to a fully qualified domain name (FQDN).
  2. The hostname found from the Reverse Resolution does not Forward Resolve to the same IP address as is connecting.

This condition is often seen for ISPs with poorly maintained DNS records.

This condition will typically not cause mail delivery to fail. 

Cisco customers can throttle or block messages from domains with DNS issues.

Revision History

Revision Publish Date Comments
1.0
15-Aug-2014
Initial Release
TAC Authored

Contributed by Cisco Engineers

  • Stephan Fiebrandt and Tomki Camp
    Cisco TAC Engineers.

Was this Document Helpful?

FeedbackFeedback

Contact Cisco

This Document Applies to These Products