Home Skip to content Skip to navigation Skip to footer
Cisco.com Worldwide Home
Document ID: 118137
Updated: Jul 31, 2014
Contributed by Tomki Camp and Stephan Bayer, Cisco TAC Engineers.
ESA models C3x0, C6x0 and X10x0 may be custom ordered to include an LC type 1000 Mbps SX (shortwave) Fiber interface. This add-on card is dual port.PLEASE NOTE: this option is not available as a field add-on, it must be included at original time of system manufacture.If an application requires LC connections, SC/LC adapters may be ordered from:
Cisco does not sell these adapters.In a system shipped with this optional hardware, Ethernet interfaces Data 3 and Data 4 under the CLI option etherconfig will represent the two Fiber ports.
Was this document helpful? Yes No
Thank you for your feedback.
Open a Support Case (Requires a Cisco Service Contract.)
The Cisco Support Community is a forum for you to ask and answer questions, share suggestions, and
collaborate with your peers.
Refer to Cisco Technical Tips Conventions for information on conventions used in this document.