Guest

Cisco 2500 Series Routers

CAB-25AS-MMOD Adapter Technical Specifications

Document ID: 47886

Updated: Jan 27, 2006

   Print

Introduction

This document provides the technical specifications for the CAB-25AS-MMOD adapter.

Prerequisites

Requirements

There are no specific requirements for this document.

Components Used

This document is not restricted to specific software and hardware versions.

The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, make sure that you understand the potential impact of any command.

Conventions

For more information on document conventions, refer to the Cisco Technical Tips Conventions.

Technical Specifications

This illustration shows adapter CAB-25AS-MMOD (part number CAB-25AS-MMOD). This adapter is used with the Cisco 2500 series, including the access server series (Cisco 2509 through Cisco 2512).

cab-25asmmod.gif

This adapter has an RJ-45 connector on one end and a male DB-25 connector on the other end.

cab-25asmmod-1.gif

This table lists the pins for the RJ-45 and MMOD:

Cable DB-25 Adapters
RJ-45 Pins MMOD Pins1
1 5
2 8
3 3
4 7
5 7
6 2
7 20
8 4

1The MMOD adapter that is available through Cisco is labeled "Modem."

Related Information

Updated: Jan 27, 2006
Document ID: 47886