Cisco 1900 Series Integrated Services Routers

1941W Integrated Services Router Configuration Example

Document ID: 115030

Updated: Jan 15, 2013

Contributed by Surendra BG and Keyur Desai, Cisco TAC Engineers.



This document provides a video that describes how to configure the Cisco 1941W Integrated Services Router (ISR).



There are no specific requirements for this document.

Components Used

This document is not restricted to specific software and hardware versions.

The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, make sure that you understand the potential impact of any command.


Refer to the Cisco Technical Tips Conventions for more information on document conventions.

Configuration Video

This video describes how to configure the Cisco 1941W ISR:

Related Information

Updated: Jan 15, 2013
Document ID: 115030