CAB-25AS-FDTE Adapter Technical Specifications

Available Languages

Updated:January 30, 2006

Document ID:47820

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Cisco - CAB-25AS-FDTE Adapter Technical Specifications

Introduction

Prerequisites

Requirements

Components Used

Conventions

CAB-25AS-FDTE Adapter

Related Information

Introduction

This document provides the technical specifications and cabling requirements for the CAB-25AS-FDTE adapter.

Prerequisites

Requirements

There are no specific requirements for this document.

Components Used

This document is not restricted to specific software and hardware versions.

The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, make sure that you understand the potential impact of any command.

Conventions

For more information on document conventions, refer to the Cisco Technical Tips Conventions.

CAB-25AS-FDTE Adapter

This illustration shows adapter CAB-25AS-FDTE (part number CAB-25AS-FDTE). This adapter is used in the Cisco 2500 series, including the Access Server series (Cisco 2509 through Cisco 2512). This adapter has an RJ-45 connector on one end and a female DB-25 connector on the other end.