Before you can successfully configure your Cisco DSL Router with Asymmetric
Digital Subscriber Line (ADSL) service, you need specific information from your
ISP. If your ISP is unsure, unable, or unwilling to provide answers to the questions
outlined below, you may not be able to correctly configure your Cisco DSL Router.
Forms are provided to help you obtain and record the information you need to
build your own configuration. Choose one of two formats for each form. Note
that each format has different requirements for saving text that you enter.
HTML Enter information in the forms on this page. Important: To save your entries you must print this page. No other
methods to save your information are available at this time.
Microsoft Word Click here
to open the forms in Microsoft Word. Fill in the forms, and then save them
on your local drive. Return to this page and continue with Choose
Your Next Step at the bottom of this page.
Important: If you need assistance with building or troubleshooting your
configuration, you must have the information in these forms accessible before you contact
the Cisco Technical Assistance Center (TAC).
Record Information from the ISP
The following form includes questions about the name of the reseller where
you purchased your Cisco DSL Router and about the name of your ISP. The remaining
questions you must ask your ISP. Fill in answers to all questions.
Record Information About Your Network
Record the following information about your private network. This information
is not related to the ISP.
Choose Your Next Step
When you have all the information you need from your ISP and about your private
network, select one of the following based on whether you have a new installation
or are troubleshooting an existing one.