Asymmetric Digital Subscriber Line (ADSL)

Cisco DSL Router Configuration and Troubleshooting Guide - RFC1483 Bridging with IRB Implementation Options

Document ID: 71102

Updated: Sep 11, 2006



This document discusses RFC 1483 bridging with IRB implementation options.



There are no specific requirements for this document.

Components Used

This document is not restricted to specific software and hardware versions.


Refer to Cisco Technical Tips Conventions for more information on document conventions.


Select one of these RFC 1483 Bridging with integrated routing and bridging (IRB) implementation options for your Asymmetric Digital Subscriber Line (ADSL) service. Both implementation options include configuration examples for Network Address Translation (NAT) overload, NAT Pool, Static NAT, and Dynamic Host Control Protocol (DHCP) Server.

Return to the previous section of this configuration and troubleshooting guide - RFC 1483 Bridging with IRB Online Form.

Return to the main page of the Cisco DSL Router Configuration and Troubleshooting Guide.

Related Information

Updated: Sep 11, 2006
Document ID: 71102