Versatile Interface Processor Crash Reason Codes

Available Languages

Updated:January 23, 2008

Document ID:15104

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Introduction

Before You Begin

Conventions

Prerequisites

Components Used

Interpreting Reason Codes

Related Information

Introduction

This document gives information on the error code reasons in Versatile Interface Processor (VIP) output.

Before You Begin

Conventions

For more information on document conventions, see the Cisco Technical Tips Conventions.

Prerequisites

This document is useful when running Cisco IOS® software releases earlier than the following:

11.1(22)CA
11.1(21)CC
11.2(18)P
11.3(7)
11.3(7)AA
11.3(7)NA
11.3(7)T

Components Used

The information in this document is based on Cisco IOS Software Release 11.2.

The information presented in this document was created from devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If you are working in a live network, ensure that you understand the potential impact of any command before using it.

Interpreting Reason Codes

In VIP output, some Cisco IOS software releases include error reasons with the message itself.

For example, in the following output, 22 is the reason code:

%VIP2-1-MSG: slot4 System exception: sig=22, code=0x0, context=0x603B91E8

This table provides a list of possible SIG values and the reason for the error:

SIG Value	Error Reason
2	unexpected hardware interrupt
3	abort due to break key
4	illegal opcode exception
5	abort due to Break Point or an arithmetic exception
8	floating point unit (FPU) exception
9	reserved exception
10	bus error exception
11	SegV exception
20	cache parity exception
21	write bus error interrupt
22	fatal hardware error
23	software-forced crash

The following output appears when running Cisco IOS software versions later than those mentioned above:

%VIP2-1-MSG: slot4 System reloaded by a fatal hardware error 
%VIP2-1-MSG: slot4 caller=0x600B60C0 
%VIP2-1-MSG: slot4 System exception: SIG=22, code=0x0, context=0x603B91E8