There are no specific requirements for this document.
This document is not restricted to specific software or hardware
versions, but Cisco IOS?? software with the IBM Feature Set is required to run
DLSw in Cisco Routers.
The information in this document was created from the devices in a
specific lab environment. All of the devices used in this document started with
a cleared (default) configuration. If your network is live, make sure that you
understand the potential impact of any command.
For more information on document conventions, refer to the
Cisco Technical Tips
This document provides troubleshooting techniques and solutions to the
most common data-link switching (DLSw) issues. Navigate this flow chart to
locate where a problem resides.
Click any of the green rectangles to view detailed information about
that step in the flowchart.