Field Notice: FN - 63478 - ONS15454-M6/SDH: TNC/TSC/TNCE/TSCE cards shipped with R9.3 software prior to 12/01/2011 experience BKUPMEMP alarm declaration - Replace on Failure

Available Languages

Updated:March 13, 2019

Document ID:FN63478

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Notice

THIS FIELD NOTICE IS PROVIDED ON AN "AS IS" BASIS AND DOES NOT IMPLY ANY KIND OF GUARANTEE OR WARRANTY, INCLUDING THE WARRANTY OF MERCHANTABILITY. YOUR USE OF THE INFORMATION ON THE FIELD NOTICE OR MATERIALS LINKED FROM THE FIELD NOTICE IS AT YOUR OWN RISK. CISCO RESERVES THE RIGHT TO CHANGE OR UPDATE THIS FIELD NOTICE AT ANY TIME.

Revision History

Revision	Publish Date	Comments
1.0	05-Jan-12	Initial Release
10.0	09-Oct-17	Migration to new field notice system
10.1	13-Mar-19	Updated the Defect Information Section

Products Affected

Affected Product ID	Comments
15454-M-TNC-K9	cards shipped with R9.3 software prior to 12/01/2011
15454-M-TNC-K9=	cards shipped with R9.3 software prior to 12/01/2011
15454-M-TNCE-K9	cards shipped with R9.3 software prior to 12/01/2011
15454-M-TNCE-K9=	cards shipped with R9.3 software prior to 12/01/2011
15454-M-TSC-K9	cards shipped with R9.3 software prior to 12/01/2011
15454-M-TSC-K9=	cards shipped with R9.3 software prior to 12/01/2011
15454-M-TSCE-K9	cards shipped with R9.3 software prior to 12/01/2011
15454-M-TSCE-K9=	cards shipped with R9.3 software prior to 12/01/2011

Defect Information

Defect ID	Headline
CSCvf34445	There were no defects filed with this field notice at the time of publication.

Problem Description

TNC/TSC/TNCE/TSCE cards shipped with R9.3 software prior to 12/01/2011 are missing a file in the package which results in BKUPMEMP alarm declaration.

The Manufacturing process has been corrected as of 12/01/2011 for this issue.

Background

During the Manufacturing process for the TNC/TSC/TNCE/TSCE the cards are preloaded with a Software release ordered by the Customer. During the loading of the package for the Software release 9.30, a required file was not being loaded which results in the alarm declaration.

Because of the missing file the system background software auditors identify that this file is missing and the BKUPMEMP alarm is reported.

Problem Symptom

The BKUPMEMP alarm will be raised on the TNC/TSC/TNCE/TSCE card preloaded with software packages with the missing file. USB Sync and USB WRITE alarms may also to be reported due to the software attempting to copy the missing file to the USB device in the LCD.

The Manufacturing process has been corrected as of 12/01/2011 for this issue.

Workaround/Solution

To resolve the issue, the 9.30 release from CCO should be loaded onto the system into both partitions. For bringing up a new shelf with new TNC/TSC/TNCE/TSCE cards perform this sequence:

1. Insert both TNCs.

(LCD should be removed)

2. Software download to protect partition.

3. Activate which will make protect partition the working.

4. Software download to the protection partition.

(If the LCD has not been inserted yet the following steps not required, only if LCD was inserted with TNCs with the manufacturing load present in the shelf prior to software download from CCO.)

5. Insert LCD.

6. Perform usbFormat to remove any loaded software on the usb flash drive. Telnet into Active TNC (telnet ip-address) and issue the usbFormat command.

7. Physically pull/reinsert LCD which will force the sync of the Active TNC partitions to the LCD.

In the event of the receipt of a single module that is inserted into the shelf in the Standby slot perform the following workaround:

1. Software download to protect partition.

2. Activate which will make protect partition the working.

3. Software download to the protection partition.

If you identify that you have this issue and the workaround has not resulted in clearing the issue, please contact the Cisco Systems Technical Assistance Center (TAC) by one of the methods listed in the "For More Information" section of this field notice.

How To Identify Affected Products

TNC/TSC/TNCE/TSCE cards listed in the above "Products Affected" section in this field notice that have shipped with R9.6.0 software prior to 12/01/2011 are affected.

Customers should check their TNC/TSC/TNCE/TSCE card serial number against the serial number validation tool provided below. The serial number validation tool will identify affected hardware. Customers who identify their hardware as affected should follow the work around procedures described in the "Workaround/Solution" section of this field notice to avoid this issue.

Serial Number Validation Tool

For More Information

If you require further assistance, or if you have any further questions regarding this field notice, please contact the Cisco Systems Technical Assistance Center (TAC) by one of the following methods:

Receive Email Notification For New Field Notices

Cisco Notification Service—Set up a profile to receive email updates about reliability, safety, network security, and end-of-sale issues for the Cisco products you specify.