Field Notice: FN # 63177 - Cisco Aironet 1250 Access Point Buzzing, Vibrating and making Noise
Revised January 28, 2009 January 8th, 2009
THIS FIELD NOTICE IS PROVIDED ON AN "AS IS" BASIS AND DOES NOT IMPLY ANY KIND OF GUARANTEE OR WARRANTY, INCLUDING THE WARRANTY OF MERCHANTABILITY. YOUR USE OF THE INFORMATION ON THE FIELD NOTICE OR MATERIALS LINKED FROM THE FIELD NOTICE IS AT YOUR OWN RISK. CISCO RESERVES THE RIGHT TO CHANGE OR UPDATE THIS FIELD NOTICE AT ANY TIME.
Removed AIR-LAP1252AG-P-K9 from products affected
Initial public release
Cisco Aironet 1252 Access Point buzzes loudly and vibrates. During that time, there might be intermittent connectivity to the Cisco Aironet 1252 Access Point.
During the time that it is buzzing, 802.11b/g clients may not be able to connect to the AP. There might be intermittent connectivity to the Cisco Aironet 1252 Access Point. This constant buzzing starts up after a few minutes.
1252 AP buzzes loudly and vibrates during operations.
Unit needs to be replaced through the Cisco RMA process. Please refer to Cisco Support for assistance.
How To Identify Hardware Levels
Please use the link below to validate your serial number(s).