Guest

Cisco Service Control Application for Mobile Networks

Field Notice: FN - 62886 - New Zealand Daylight Saving Time Policy Changes Effective September 2007 for NME-APA


September 18, 2007

NOTICE:

THIS FIELD NOTICE IS PROVIDED ON AN "AS IS" BASIS AND DOES NOT IMPLY ANY KIND OF GUARANTEE OR WARRANTY, INCLUDING THE WARRANTY OF MERCHANTABILITY. YOUR USE OF THE INFORMATION ON THE FIELD NOTICE OR MATERIALS LINKED FROM THE FIELD NOTICE IS AT YOUR OWN RISK. CISCO RESERVES THE RIGHT TO CHANGE OR UPDATE THIS FIELD NOTICE AT ANY TIME.


Products Affected

Products Affected

Comments

SCP - NME-APA-E2

Application Performance Assurance Module For 2800-series ISR

SCP - NME-APA-E3

Application Performance Assurance Module For 3800-series ISR

APA-R3-VO - 1.0.0.0

Device Management Application

  

Problem Description

New Zealand DST Changes in 2007:

On 30 April 2007, Hon Rick Barker, Minister of Internal Affairs, announced a three week extension to the period of daylight saving.

Daylight saving now runs from the last Sunday in September until the first Sunday in April. For systems that are not located in affected countries, no action should be taken, and this field notice may be disregarded for these systems.

Background

Event

Prior to 2007

Year 2007 and After

Start

First Sunday in October

2:00 A.M. on September 30, 2007

(Last Sunday in September)

End

Third Sunday in March

3:00 A.M.on April 6, 2008

(First Sunday in April)

  

For more information regarding Daylight Saving Time in New Zealand, visit:

Daylight saving to be extended.

Problem Symptoms

Time is off after Daylight Saving time event.

Workaround/Solution

The Microsoft patch will correct the DST accordingly.

See Microsoft Support - New Zealand 2007 Daylight Saving Changes.

For NME-APA, user will need to configure it using the APA Device Console as shown below:

fn62886_jmvfuz.png

DDTS

To follow the bug ID link below and see detailed bug information, you must be a registered user and you must be logged in.

DDTS

Description

CSCsj81707 (registered customers only)

Daylight saving accepts improper date : Configuration Screen : Time tab

  

Revision History

Revision

Date

Comment

1.0

18-SEP-2007

Initial Public Release

  

For More Information

If you require further assistance, or if you have any further questions regarding this field notice, please contact the Cisco Systems Technical Assistance Center (TAC) by one of the following methods:

Receive Email Notification For New Field Notices

Product Alert Tool - Set up a profile to receive email updates about reliability, safety, network security, and end-of-sale issues for the Cisco products you specify.