Guest

Cisco SCE 1000 Series Service Control Engine

Field Notice: *Expired* FN - 62609 - SCE SCAS BB - Applying an SCAS BB 3.0.3 PQB with a PP05 DSS to a 3.0.4 SCE Fails

Cisco - Field Notice: *Expired* FN - 62609 - SCE SCAS BB - Applying an SCAS BB 3.0.3 PQB with a PP05 DSS to a 3.0.4 SCE Fails

Revised April 14, 2008
November 21, 2006

NOTICE:

THIS FIELD NOTICE HAS BEEN EXPIRED AND IS NO LONGER MAINTAINED OR UPDATED BY CISCO.

THIS FIELD NOTICE IS PROVIDED ON AN "AS IS" BASIS AND DOES NOT IMPLY ANY KIND OF GUARANTEE, WARRANTY OR SUPPORT. USE OF THE INFORMATION ON THIS FIELD NOTICE OR MATERIALS LINKED FROM THIS FIELD NOTICE IS AT YOUR OWN RISK. CISCO RESERVES THE RIGHT TO CHANGE OR UPDATE THIS FIELD NOTICE AT ANY TIME.


Products Affected

Products Affected

Comments

SCE SCAS BB - 3.0.4

Service Control Engine Service Control Application System

  

Problem Description

A PQB file that was saved in an SCAS BB 3.0.3 Console, and includes a Protocol Pack 05 (PP05) Dynamic Signatures Script (DSS) in it, cannot be applied to an SCE with version 3.0.4.

This DSS is being added to the PQB as part of the PP05 installation procedure. The problem is expected with 3.0.3 releases that were upgraded to PP05.

Background

The SCAS BB Console includes a Dynamic Signature Editor, enabling the user to create protocol specific signatures to customize the classification profile to local needs. The Dynamic Signature file (DSS) is imported into the Service Configuration (PQB file), which is applied to the SCE for the updated configuration to become effective.

In this particular case, an internal storage area that had been used in Protocol Pack 05 has been removed from the 3.0.4 protocol libraries. When applying, this value is attempted to be set, which results in an error.

Problem Symptoms

The following error appears during the apply process:

Dynamic Signatures Script execution failed. Script file may be corrupted or contains invalid CLI commands.

Workaround/Solution

Before applying such a PQB on a 3.0.4 SCE, open it in the SCAS BB Console and remove the DSS.

DDTS

To follow the bug ID link below and see detailed bug information, you must be a registered user and you must be logged in.

DDTS

Description

CSCsg57070 (registered customers only)

When upgrading from 3.0.3 to 3.0.4, if Protocol Pack PP05 was installed on top of 3.0.3, a service configuration which was saved in 3.0.3 cannot be applied to the 3.0.4 SCE.

  

Revision History

Revision

Date

Comment

1.0

21-NOV-2006

Initial Public Release

  

For More Information

If you require further assistance, or if you have any further questions regarding this field notice, please contact the Cisco Systems Technical Assistance Center (TAC) by one of the following methods:

Receive Email Notification For New Field Notices

Product Alert Tool - Set up a profile to receive email updates about reliability, safety, network security, and end-of-sale issues for the Cisco products you specify.